What is a Regenerative gas truck furnace? Introduction to the principle of heating furnace structure

Regenerative gas truck furnaceIt is a forging heating device using gas as fuel.，Structure consists of ventilation system, combustor, ventilation system, recovery of waste heat, recovery of waste heat and so on，has been favored by more and more customers.。The following is to introduce the Regenerative gas truck furnace:

1、Brief introduction of Regenerative gas truck furnace

Regenerative gas truck furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It has the functions of Metal melting and casting, Metal forging heating, Improve production efficiency, Energy conservation and environmental protection and Metal melting and casting，the product looks beautiful.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it has the characteristics of energy-efficient, Strong adaptability, energy-efficient, Stable and reliable and Easy to control。

Regenerative gas truck furnace

2、Regenerative gas truck furnace principle

Regenerative gas truck furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in surface treatment, automobile, Machinery manufacturing, building materials, light industry and other industries，It has a wide range of uses, including Energy conservation and environmental protection, Metal heat treatment, Metal tempering, Improve production efficiency and Metal forging heating，is a common Regenerative gas truck furnace，support customization。

Regenerative gas truck furnace

3、Structural characteristics of Regenerative gas truck furnace

The Regenerative gas truck furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Regenerative gas truck furnace

4、Regenerative gas truck furnace use

Regenerative gas truck furnaces have the following purposes.

1. Improve production efficiency

The Regenerative gas truck furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal heat treatment

In addition to forging heating, Regenerative gas truck furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Regenerative gas truck furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Regenerative gas truck furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas truck furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Regenerative gas truck furnace

5、Regenerative gas truck furnace function

Regenerative gas truck furnaceit has the functions of Casting heating, temper, heat treatment, Casting heating and normalizing，usually used in shipping, material, electron, pharmacy, chemical industry and other fields，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is an ideal choice for customers to buy Regenerative gas truck furnace。

Regenerative gas truck furnace

6、One-combustion energy saving's strength

The company has many years of Regenerative gas truck furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Regenerative gas truck furnaceit has the functions of anneal, quench, hardening and tempering, Forging heating and temper，structure mainly includes: ventilation system, ventilation system, combustor, convection chamber, Radiation chamber and so on，Regenerative gas truck furnaceThe overall structural design is simple, diverse and beautiful.，widely used in chemical industry, petroleum, war industry, aerospace, light industry and other fields。