What is a Casting heat treatment trolley heating furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

Casting heat treatment trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in aerospace, metallurgy, war industry, electron and chemical industry，it has the characteristics of Stable and reliable, Easy to maintain, energy-efficient, Strong adaptability and energy saving and environmental protection。

1、Brief introduction of Casting heat treatment trolley heating furnace

Casting heat treatment trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is a common Casting heat treatment trolley heating furnace，the product looks atmospheric.，multifunctional, with functions such as Forging heating, hardening and tempering, heat treatment, normalizing and Forging heating。

Casting heat treatment trolley heating furnace

2、Introduction of Casting heat treatment trolley heating furnace characteristics

Casting heat treatment trolley heating furnace has the following characteristics

1. Efficient heating

The Casting heat treatment trolley heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The Casting heat treatment trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Casting heat treatment trolley heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Casting heat treatment trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Casting heat treatment trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Casting heat treatment trolley heating furnace

3、Casting heat treatment trolley heating furnace HD picture

HD pictures of Casting heat treatment trolley heating furnace of different specifications and models。

Casting heat treatment trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Casting heat treatment trolley heating furnace application

Casting heat treatment trolley heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Casting heat treatment trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Casting heat treatment trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Casting heat treatment trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Casting heat treatment trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Casting heat treatment trolley heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Casting heat treatment trolley heating furnace

5、Casting heat treatment trolley heating furnace application

Casting heat treatment trolley heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Casting heat treatment trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Casting heat treatment trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Improve production efficiency

The Casting heat treatment trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Casting heat treatment trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Casting heat treatment trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Casting heat treatment trolley heating furnace

6、Casting heat treatment trolley heating furnace price

The Casting heat treatment trolley heating furnace price is introduced as follows:

1. model

There are many specifications and models of Casting heat treatment trolley heating furnace, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. quality

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Casting heat treatment trolley heating furnace.

4. market quotation

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Casting heat treatment trolley heating furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Casting heat treatment trolley heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Casting heat treatment trolley heating furnace price can meet the purchasing needs of customers.

Casting heat treatment trolley heating furnace

Casting heat treatment trolley heating furnaceis a popular Casting heat treatment trolley heating furnace，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，It is mostly used in Energy conservation and environmental protection, Metal forging heating, Metal melting and casting, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection and so on。