Introduction to Pressure vessel trolley furnace and Forging furnace structure principle

Pressure vessel trolley furnaceIt is a forging heating device using gas as fuel.，it has the functions of quench, temper, anneal, quench and Forging heating。

1、Brief introduction of Pressure vessel trolley furnace

Pressure vessel trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Pressure vessel trolley furnace

2、Pressure vessel trolley furnace performance advantage

The advantages of Pressure vessel trolley furnace are as follows:

1. easy to operate

The operation interface of the Pressure vessel trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Intelligent control

The Pressure vessel trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The Pressure vessel trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Wide application range

The Pressure vessel trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Pressure vessel trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

Pressure vessel trolley furnace

3、Pressure vessel trolley furnace HD picture

Pressure vessel trolley furnace high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Pressure vessel trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Structural characteristics of Pressure vessel trolley furnace

The Pressure vessel trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Pressure vessel trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Radiation chamber

The heat load of the main place for Pressure vessel trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Pressure vessel trolley furnace

5、Introduction of advantages of Pressure vessel trolley furnace

Pressure vessel trolley furnaces have the following advantages.

1. Multiple fuel options

Although the Pressure vessel trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Rapid temperature rise

The Pressure vessel trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Rapid temperature rise

The Pressure vessel trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Extend the service life of equipment

The Pressure vessel trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Pressure vessel trolley furnace

6、Pressure vessel trolley furnace function

Pressure vessel trolley furnacemultifunctional, with functions such as Casting heating, normalizing, temper, heat treatment and anneal。

Pressure vessel trolley furnace

Pressure vessel trolley furnacewidely used in building materials, automobile, light industry, Household necessities, petroleum and other fields，is a kind of high quality and low price Pressure vessel trolley furnace。