Introduction to Protective gas trolley heating furnace and heating furnace advantages and features

Protective gas trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is usually composed of ventilation system, combustor, ventilation system, Radiation chamber and convection chamber，It is mostly used in Metal heat treatment, Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal tempering, Metal heat treatment and so on。The following is to introduce the Protective gas trolley heating furnace:

1、Brief introduction of Protective gas trolley heating furnace

Protective gas trolley heating furnaceIt is a forging heating device using gas as fuel.，widely used in chemical industry, shipping, building materials, Household necessities, petroleum and other fields，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，it has the functions of quench, hardening and tempering, Forging heating, heat treatment and quench，is a kind of Protective gas trolley heating furnace manufactured by One-combustion energy saving。

Protective gas trolley heating furnace

2、Protective gas trolley heating furnace characteristics

The Protective gas trolley heating furnace features are as follows:

1. Strong adaptability

The Protective gas trolley heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to maintain

The structural design of the Protective gas trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Protective gas trolley heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Protective gas trolley heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Stable and reliable

The Protective gas trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Protective gas trolley heating furnace

3、Protective gas trolley heating furnace principle

Protective gas trolley heating furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks atmospheric.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Protective gas trolley heating furnace

4、Protective gas trolley heating furnace structure composition

The Protective gas trolley heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Protective gas trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Protective gas trolley heating furnace

5、Introduction of advantages of Protective gas trolley heating furnace

The advantages of Protective gas trolley heating furnace are as follows:

1. Wide application range

The Protective gas trolley heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Improve product quality

Because the Protective gas trolley heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Uniform heating

The Protective gas trolley heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. easy to operate

The operation interface of the Protective gas trolley heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Protective gas trolley heating furnace

6、Protective gas trolley heating furnace price

The Protective gas trolley heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Brand strength

At present, there are various brands of Protective gas trolley heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Protective gas trolley heating furnace are different.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Protective gas trolley heating furnace price and service can meet the actual needs of customers.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

5. specifications and models

The same type of equipment, with different models and sizes, has different investment costs, so the quotations to customers are naturally different. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

Protective gas trolley heating furnace

Protective gas trolley heating furnaceCommonly used inMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal melting and casting and so on，multifunctional, with functions such as Casting heating, normalizing, temper, anneal and hardening and tempering，energy-efficient,energy saving and environmental protection,Easy to control,Strong adaptability,Stable and reliable。