Introduction to Preheating trolley forging furnace, introduction to forging furnace advantages and characteristics

Preheating trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as normalizing, hardening and tempering, temper, quench and Casting heating，is a popular Preheating trolley forging furnace，it has the functions of heat treatment, heat treatment, anneal, Forging heating and temper，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

1、Brief introduction of Preheating trolley forging furnace

Preheating trolley forging furnaceIt is a forging heating device using gas as fuel.。

Preheating trolley forging furnace

2、Preheating trolley forging furnace use

The purpose of Preheating trolley forging furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Preheating trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal heat treatment

In addition to forging heating, Preheating trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Preheating trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Preheating trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Preheating trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Preheating trolley forging furnace

3、Preheating trolley forging furnace performance advantage

Preheating trolley forging furnaces have the following advantages.

1. easy to operate

The operation interface of the Preheating trolley forging furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Preheating trolley forging furnace can significantly reduce energy consumption, thus reducing operating costs.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Rapid temperature rise

The Preheating trolley forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Multiple fuel options

Although the Preheating trolley forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Preheating trolley forging furnace

4、Advantages of Preheating trolley forging furnace principle

Preheating trolley forging furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，reliable quality。

Preheating trolley forging furnace

5、Video analysis of Preheating trolley forging furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Preheating trolley forging furnace production process and production site, and gain favorable comments and recognition from customers.。

Preheating trolley forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd usually used in shipping, metallurgy, heat treatment, petroleum, war industry and other fields。

Preheating trolley forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Mainly used forEnergy conservation and environmental protection,Metal melting and casting,Improve production efficiency,Energy conservation and environmental protection andMetal tempering。