Introduction to Dual car regenerative heating furnace, advantages, characteristics and principles of heating furnace

Dual car regenerative heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of normalizing, temper, anneal, heat treatment and Forging heating，multifunctional, with functions such as Casting heating, normalizing, temper, quench and hardening and tempering。

1、Brief introduction of Dual car regenerative heating furnace

Dual car regenerative heating furnaceIt is a forging heating device using gas as fuel.。

Dual car regenerative heating furnace

2、Dual car regenerative heating furnace use

The purpose of Dual car regenerative heating furnace is introduced as follows:

1. Metal forging heating

The Dual car regenerative heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual car regenerative heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Dual car regenerative heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Dual car regenerative heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Dual car regenerative heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Dual car regenerative heating furnace

3、Dual car regenerative heating furnace principle

Dual car regenerative heating furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Dual car regenerative heating furnace

4、Dual car regenerative heating furnace application

Dual car regenerative heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual car regenerative heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal tempering

By properly heating and cooling the metal material, the Dual car regenerative heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Dual car regenerative heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Dual car regenerative heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Dual car regenerative heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Dual car regenerative heating furnace

5、How much is the Dual car regenerative heating furnace?

The Dual car regenerative heating furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Dual car regenerative heating furnace have more or less differences in price.

2. Reasonable cost

A Dual car regenerative heating furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

3. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Dual car regenerative heating furnace

6、Introduction of One-combustion energy saving Company

One-combustion energy saving, as one of the professional and powerful Dual car regenerative heating furnace manufacturers in Jinan, Shandong province, produces Dual car regenerative heating furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Dual car regenerative heating furnaceit has the functions of anneal, quench, temper, normalizing and Forging heating，the product looks atmospheric.。