Introduction to Trolley forging heating furnace and heating furnace structure principle

Trolley forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a popular Trolley forging heating furnace，it has the functions of temper, heat treatment, quench, heat treatment and quench，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.。

1、Brief introduction of Trolley forging heating furnace

Trolley forging heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，features include Stable and reliable, Strong adaptability, Easy to maintain, Easy to control and energy saving and environmental protection，Widely used inMetal melting and casting,Metal tempering,Metal heat treatment,Metal forging heating,Improve production efficiency and so on，can be customized according to user's needs.。

Trolley forging heating furnace

2、Advantages of Trolley forging heating furnace principle

Trolley forging heating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a forging heating device using gas as fuel.，it is an ideal choice for customers to buy Trolley forging heating furnace。

Trolley forging heating furnace

3、Trolley forging heating furnace picture

Excellent material selection,the product looks atmospheric., trustworthy, panoramic shooting, helpful for customer reference.。

Trolley forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Trolley forging heating furnace function

Trolley forging heating furnacemultifunctional, with functions such as normalizing, anneal, temper, hardening and tempering and Forging heating，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。

Trolley forging heating furnace

5、Trolley forging heating furnace price

The Trolley forging heating furnace price is introduced as follows:

1. regional difference

One-combustion energy saving the address is located at:Jinan, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

2. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. market quotation

Generally, when the supply of Trolley forging heating furnace exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

4. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. mass discrepancy

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Trolley forging heating furnace is low.

Trolley forging heating furnace

6、One-combustion energy saving's strength

The company has many years of Trolley forging heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Trolley forging heating furnacethe product looks beautiful.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。