Introduction to Gas tube annealing furnace, introduction to Forging furnace advantages and characteristics

Gas tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，it is mainly composed of furnace chamber, furnace chamber, Radiation chamber, ventilation system and ventilation system，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，can be customized according to user's needs.。The following is to introduce the Gas tube annealing furnace:

1、Brief introduction of Gas tube annealing furnace

Gas tube annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Gas tube annealing furnace，it has the functions of normalizing, temper, quench, Forging heating and heat treatment。

Gas tube annealing furnace

2、Gas tube annealing furnace video live broadcast

The following is the live video of Gas tube annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace. of One-combustion energy savingGas tube annealing furnace.。

Gas tube annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The structural design is more advanced and reasonable.，it is usually composed of convection chamber, recovery of waste heat, combustor, furnace chamber and ventilation system。

3、Gas tube annealing furnace function

Gas tube annealing furnaceit has the functions of quench, anneal, Forging heating, Casting heating and normalizing，Widely used inMetal forging heating,Metal melting and casting,Metal tempering,Energy conservation and environmental protection,Improve production efficiency and so on。

Gas tube annealing furnace

4、Gas tube annealing furnace use

The purpose of Gas tube annealing furnace is introduced as follows:

1. Improve production efficiency

The Gas tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Gas tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Gas tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Gas tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Gas tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Gas tube annealing furnace

5、Gas tube annealing furnace price consultation

The Gas tube annealing furnace price is introduced as follows:

1. deploy

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Reasonable sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

4. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Gas tube annealing furnace

6、How to choose the right product manufacturer?

Choosing a suitable Gas tube annealing furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Gas tube annealing furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Gas tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，it is widely used in shipping, Machinery manufacturing, electron, Household necessities, aerospace and other industries。