What is a High temperature tube annealing furnace? Introduction to the principle of Forging furnace structure

High temperature tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。The following is to introduce the High temperature tube annealing furnace:

1、Brief introduction of High temperature tube annealing furnace

High temperature tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a High temperature tube annealing furnace，be loved by our customers.。

High temperature tube annealing furnace

2、High temperature tube annealing furnace principle

High temperature tube annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，The structural design is more advanced and reasonable.，it is mainly composed of furnace chamber, ventilation system, convection chamber, ventilation system and recovery of waste heat，it can be used in pharmacy, Household necessities, chemical industry, material, electron and other industries，it has the functions of hardening and tempering, normalizing, Casting heating, normalizing and Forging heating。

High temperature tube annealing furnace

3、High temperature tube annealing furnace function

High temperature tube annealing furnaceit has the functions of temper, quench, hardening and tempering, Casting heating and anneal，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a popular High temperature tube annealing furnace，the product looks atmospheric.，customizable。

High temperature tube annealing furnace

4、High temperature tube annealing furnace advantage

The advantages of High temperature tube annealing furnace are as follows:

1. Wide application range

The High temperature tube annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. easy to operate

The operation interface of the High temperature tube annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Efficient combustion

The High temperature tube annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Rapid temperature rise

The High temperature tube annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Uniform heating

The High temperature tube annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

High temperature tube annealing furnace

5、Structural advantages of High temperature tube annealing furnace

The High temperature tube annealing furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for High temperature tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

High temperature tube annealing furnace

6、One-combustion energy saving service

The stable development of a manufacturer depends not only on product quality, but also on after-sales. Therefore, besides paying attention to product quality and price, the after-sales service of the manufacturer also plays a very important role in the future product application. One-combustion energy saving provides "housekeeping" after-sales service, which is more intimate.。

One-combustion energy saving

High temperature tube annealing furnacethe product looks beautiful.，is a common High temperature tube annealing furnace，it is usually composed of ventilation system, ventilation system, combustor, Radiation chamber and furnace chamber，High temperature tube annealing furnaceThe overall structural design is relatively simple。