Introduction to Regenerative natural gas chamber furnace and heating furnace advantages and features

Regenerative natural gas chamber furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a popular Regenerative natural gas chamber furnace，it is mainly composed of Radiation chamber, recovery of waste heat, ventilation system, furnace chamber and convection chamber，This Regenerative natural gas chamber furnaceThe overall structural design is simple, diverse and beautiful.，be loved by our customers.。The following is to introduce the Regenerative natural gas chamber furnace:

1、Brief introduction of Regenerative natural gas chamber furnace

Regenerative natural gas chamber furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，super quality and competitive price。

Regenerative natural gas chamber furnace

2、Regenerative natural gas chamber furnace application

Regenerative natural gas chamber furnaces have the following purposes.

1. Improve production efficiency

The Regenerative natural gas chamber furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Regenerative natural gas chamber furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative natural gas chamber furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Regenerative natural gas chamber furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Regenerative natural gas chamber furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Regenerative natural gas chamber furnace

3、Functional advantages of Regenerative natural gas chamber furnace

Regenerative natural gas chamber furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative natural gas chamber furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Multiple fuel options

Although the Regenerative natural gas chamber furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. easy to operate

The operation interface of the Regenerative natural gas chamber furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Rapid temperature rise

The Regenerative natural gas chamber furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Multiple fuel options

Although the Regenerative natural gas chamber furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Regenerative natural gas chamber furnace

4、Regenerative natural gas chamber furnace function

Regenerative natural gas chamber furnacemultifunctional, with functions such as anneal, Forging heating, normalizing, quench and hardening and tempering，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，can be customized according to user's needs.。

Regenerative natural gas chamber furnace

5、Video analysis of Regenerative natural gas chamber furnace

You can buy Regenerative natural gas chamber furnace according to your needs and show you product videos.。

Regenerative natural gas chamber furnace

As you can see from the live video.，One-combustion energy saving The structural design is more advanced and reasonable.，it is usually composed of furnace chamber, combustor, ventilation system, Radiation chamber and ventilation system。

6、Regenerative natural gas chamber furnace price advantage

The Regenerative natural gas chamber furnace price is introduced as follows:

1. market

If there is a large demand for Regenerative natural gas chamber furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

2. Model specification

Because there are many specifications and models of Regenerative natural gas chamber furnace, the quotations of Regenerative natural gas chamber furnace with different specifications and models are different.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Regenerative natural gas chamber furnace price and service can meet the actual needs of customers.

4. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Regenerative natural gas chamber furnace have more or less differences in price.

Regenerative natural gas chamber furnace

Regenerative natural gas chamber furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as anneal, normalizing, heat treatment, Casting heating and Forging heating，features include energy-efficient, Easy to maintain, energy saving and environmental protection, Stable and reliable and Strong adaptability。