What is a Normal furnace room type? Introduction to the principle of forging furnace structure

Normal furnace room typeIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a kind of high quality and low price Normal furnace room type。

1、Brief introduction of Normal furnace room type

Normal furnace room typeIt is an efficient, energy-saving and environment-friendly metal heating device.，widely used in metallurgy, building materials, pharmacy, chemical industry, shipping and other fields，Mainly used forMetal melting and casting,Metal tempering,Metal heat treatment,Improve production efficiency andEnergy conservation and environmental protection，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as normalizing, temper, hardening and tempering, quench and Forging heating。

Normal furnace room type

2、Structural characteristics of Normal furnace room type

The Normal furnace room type structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Normal furnace room type

3、Normal furnace room type function

Normal furnace room typemultifunctional, with functions such as normalizing, hardening and tempering, anneal, temper and Casting heating，is based on One-combustion energy saving is a Normal furnace room type newly developed by One-combustion energy saving。

Normal furnace room type

4、Normal furnace room type characteristics

The Normal furnace room type features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Stable and reliable

The Normal furnace room type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Normal furnace room type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Normal furnace room type can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Strong adaptability

The Normal furnace room type is suitable for forging and heating of various metal materials and has a wide range of applications.

Normal furnace room type

5、Normal furnace room type use

The purpose of Normal furnace room type is introduced as follows:

1. Metal forging heating

The Normal furnace room type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Normal furnace room types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Normal furnace room type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Normal furnace room type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Normal furnace room types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Normal furnace room type

6、How much is the Normal furnace room type?

The Normal furnace room type price is introduced as follows:

1. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Normal furnace room type manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Normal furnace room type price can meet the purchasing needs of customers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

4. Model size

There are several specifications and models of Normal furnace room type, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Normal furnace room type, and the budget and other requirements recommend suitable Normal furnace room type for everyone.

5. Low cost of raw materials

When the Normal furnace room type is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

Normal furnace room type

Normal furnace room typeit has been widely used in light industry, Household necessities, surface treatment, material, electron and other industries，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。