What is a Composite quenching heating furnace? How much is the price of the Forging furnace?

Composite quenching heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The overall structural design is simple, diverse and beautiful.，it has the structure of ventilation system, furnace chamber, Radiation chamber, recovery of waste heat and ventilation system，it has the functions of Forging heating, normalizing, anneal, hardening and tempering and Forging heating，Easy to maintain,energy-efficient,Stable and reliable,energy saving and environmental protection,Easy to control，The price is more affordable，be of high quality。The following is to introduce the Composite quenching heating furnace:

1、Brief introduction of Composite quenching heating furnace

Composite quenching heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is carefully developed by One-combustion energy saving combined with advanced technology。

Composite quenching heating furnace

2、Composite quenching heating furnace function

Composite quenching heating furnacemultifunctional, with functions such as Casting heating, quench, temper, normalizing and heat treatment，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

Composite quenching heating furnace

3、Composite quenching heating furnace video live broadcast

Speak directly with facts on the spot。

Composite quenching heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

4、Introduction of Composite quenching heating furnace characteristics

Composite quenching heating furnace has the following characteristics

1. Efficient heating

The Composite quenching heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Composite quenching heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Stable and reliable

The Composite quenching heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Composite quenching heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Composite quenching heating furnace

5、Composite quenching heating furnace performance advantage

The advantages of Composite quenching heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Composite quenching heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Intelligent control

The Composite quenching heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Composite quenching heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Wide application range

The Composite quenching heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Composite quenching heating furnace

6、Why choose One-combustion energy saving?

Choosing a suitable Composite quenching heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Composite quenching heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Composite quenching heating furnacefeatures include Easy to control, Strong adaptability, energy-efficient, Stable and reliable and energy saving and environmental protection，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。