Introduction to Split type quenching heating furnace, how much is the price of the forging furnace?

Split type quenching heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the characteristics of energy-efficient, Stable and reliable, energy saving and environmental protection, Easy to control and Strong adaptability，is a popular Split type quenching heating furnace，is a kind of Split type quenching heating furnace manufactured by One-combustion energy saving。

1、Brief introduction of Split type quenching heating furnace

Split type quenching heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is mainly composed of Radiation chamber, furnace chamber, recovery of waste heat, ventilation system and ventilation system，This Split type quenching heating furnaceThe overall structural design is relatively simple，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，is an advanced Split type quenching heating furnace developed by our company in combination with the actual situation of the industry。

Split type quenching heating furnace

2、Functional advantages of Split type quenching heating furnace

Split type quenching heating furnaces have the following advantages.

1. Intelligent control

The Split type quenching heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Rapid temperature rise

The Split type quenching heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Improve product quality

Because the Split type quenching heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Multiple fuel options

Although the Split type quenching heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Split type quenching heating furnace

3、Split type quenching heating furnace application

Split type quenching heating furnaces have the following purposes.

1. Improve production efficiency

The Split type quenching heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Split type quenching heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Split type quenching heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Split type quenching heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Split type quenching heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Split type quenching heating furnace

4、Advantages of Split type quenching heating furnace principle

Split type quenching heating furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a kind of high quality and low price Split type quenching heating furnace，usually used in electron, shipping, machinery, light industry, shipping and other fields。

Split type quenching heating furnace

5、Split type quenching heating furnace price consultation

The Split type quenching heating furnace price is introduced as follows:

1. company strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Split type quenching heating furnace have more or less differences in price.

3. regional difference

The price of Split type quenching heating furnace in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a professional factory in Jinan not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Split type quenching heating furnace price positioning more reasonable, low-cost and economical.

4. market competition

The amount of customers' demand for Split type quenching heating furnace in the market also has a great influence on the price. When there are many customers purchasing this product in the market and the supply quantity of manufacturers is small, the Split type quenching heating furnace price will be very high. On the contrary, when fewer customers purchase this product, there will be a phenomenon of oversupply, and the price of Split type quenching heating furnace will naturally be reduced.

5. specifications and models

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

Split type quenching heating furnace

6、Company discount

Split type quenching heating furnace is a new type of forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for Household necessities and other industries. Now consult Split type quenching heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Split type quenching heating furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。