Introduction to Dual platform annealing heat treatment furnace, advantages, characteristics and principles of heating furnace

Dual platform annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，features include Easy to control, Easy to maintain, Strong adaptability, energy-efficient and Stable and reliable，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it is an ideal choice for customers to buy Dual platform annealing heat treatment furnace。

1、Brief introduction of Dual platform annealing heat treatment furnace

Dual platform annealing heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Dual platform annealing heat treatment furnace，Widely used in Energy conservation and environmental protection, Metal tempering, Metal forging heating, Metal melting and casting and Metal forging heating，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，has been favored by more and more customers.。

Dual platform annealing heat treatment furnace

2、Dual platform annealing heat treatment furnace application

Dual platform annealing heat treatment furnaces have the following purposes.

1. Energy conservation and environmental protection

The Dual platform annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Dual platform annealing heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Dual platform annealing heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Dual platform annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Dual platform annealing heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Dual platform annealing heat treatment furnace

3、Dual platform annealing heat treatment furnace work site real shot

Display of Dual platform annealing heat treatment furnace with different specifications and models。

Dual platform annealing heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Dual platform annealing heat treatment furnace characteristics

Dual platform annealing heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Dual platform annealing heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Dual platform annealing heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Stable and reliable

The Dual platform annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Dual platform annealing heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Dual platform annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Dual platform annealing heat treatment furnace

5、Functional advantages of Dual platform annealing heat treatment furnace

Dual platform annealing heat treatment furnaces have the following advantages.

1. easy to operate

The operation interface of the Dual platform annealing heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Dual platform annealing heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Improve product quality

Because the Dual platform annealing heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Efficient combustion

The Dual platform annealing heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Extend the service life of equipment

The Dual platform annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Dual platform annealing heat treatment furnace

6、Dual platform annealing heat treatment furnace use

The purpose of Dual platform annealing heat treatment furnace is introduced as follows:

1. Improve production efficiency

The Dual platform annealing heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Dual platform annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Dual platform annealing heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual platform annealing heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Dual platform annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Dual platform annealing heat treatment furnace

Dual platform annealing heat treatment furnaceMainly used forMetal heat treatment,Energy conservation and environmental protection,Metal tempering,Metal melting and casting andImprove production efficiency，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。