What is a Reflective Annealing Industrial Furnace? Introduction to the advantages and characteristics of heating furnace functions

Reflective Annealing Industrial FurnaceIt is a forging heating device using gas as fuel.，it has the characteristics of Easy to control, energy saving and environmental protection, Easy to maintain, Stable and reliable and energy-efficient，Commonly used inEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal tempering,Metal heat treatment and so on。

1、Brief introduction of Reflective Annealing Industrial Furnace

Reflective Annealing Industrial FurnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is a common Reflective Annealing Industrial Furnace，multifunctional, with functions such as Casting heating, quench, hardening and tempering, temper and Forging heating，has been favored by more and more customers.。

Reflective Annealing Industrial Furnace

2、Reflective Annealing Industrial Furnace application

Reflective Annealing Industrial Furnaces have the following purposes.

1. Energy conservation and environmental protection

The Reflective Annealing Industrial Furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Reflective Annealing Industrial Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Reflective Annealing Industrial Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Reflective Annealing Industrial Furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Reflective Annealing Industrial Furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Reflective Annealing Industrial Furnace

3、Reflective Annealing Industrial Furnace principle

Reflective Annealing Industrial FurnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Widely used in Metal melting and casting, Energy conservation and environmental protection, Metal melting and casting, Metal forging heating and Improve production efficiency，support customization。

Reflective Annealing Industrial Furnace

4、Reflective Annealing Industrial Furnace structure composition

The Reflective Annealing Industrial Furnace has the following structure

1. Radiation chamber

The heat load of the main place for Reflective Annealing Industrial Furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Reflective Annealing Industrial Furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Reflective Annealing Industrial Furnace

5、Reflective Annealing Industrial Furnace HD picture real shot

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Reflective Annealing Industrial Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Company selection skills

Choosing a suitable Reflective Annealing Industrial Furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Reflective Annealing Industrial Furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Reflective Annealing Industrial Furnaceit is mainly composed of furnace chamber, combustor, ventilation system, recovery of waste heat and ventilation system，productSimple structure and reliable operation.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。