What is a Dust removal and environmental protection pneumatic conveying? Introduction to the advantages and characteristics of the Powder pneumatic conveying

Dust removal and environmental protection pneumatic conveyingis a reliable material conveying system for conveying powdery materials under high pressure.，widely used in cast, medicine, chemical industry, machine building, transportation and other fields，in the course of work,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，Remote operation can be carried out from several points to one place or from one place to several points.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、The whole conveying process is sealed.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.，Mainly used forEnvironmental protection and cleaner production,Heating, cooling and drying,Long distance transportation,Mixing and classification andBulk material transportation。

1、Brief introduction of Dust removal and environmental protection pneumatic conveying

Dust removal and environmental protection pneumatic conveyingit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，it has the characteristics of Easy to automate management, Simple system, Wide range of conveying materials, The failure rate is low and Flexible transmission line，the main structure includes Conveying pipeline system, delivery system, Conveying pipeline system, Bunker system, dust pelletizing system and so on，it is widely used in power, building material, building materials, chemical industry and grain processing，the product looks atmospheric.。

Dust removal and environmental protection pneumatic conveying

2、Introduction of Dust removal and environmental protection pneumatic conveying characteristics

Dust removal and environmental protection pneumatic conveyingthe main features are omniseal, automation, Avoid material pollution, It is convenient to realize mechanization and automation。

Dust removal and environmental protection pneumatic conveying

3、Dust removal and environmental protection pneumatic conveying function

Dust removal and environmental protection pneumatic conveyingit has the functions of Physical processing assistance, Explosion-proof involves, Automatic control, Physical processing assistance and Closed conveying，widely used intransportation,cast,chemical plant,medicine,heat-engine plant and other industries，customizable。

Dust removal and environmental protection pneumatic conveying

4、Dust removal and environmental protection pneumatic conveying work site real shot

Dust removal and environmental protection pneumatic conveying specifications and models, novel design, beautiful appearance, for our customers to visit.。

Dust removal and environmental protection pneumatic conveying

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Dust removal and environmental protection pneumatic conveying structure composition

The Dust removal and environmental protection pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Dust removal and environmental protection pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Air source device

The air source device is the power core of the Dust removal and environmental protection pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Dust removal and environmental protection pneumatic conveying

6、Dust removal and environmental protection pneumatic conveying structure

The Dust removal and environmental protection pneumatic conveying structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dust removal and environmental protection pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Dust removal and environmental protection pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Dust removal and environmental protection pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Dust removal and environmental protection pneumatic conveying

Dust removal and environmental protection pneumatic conveyingit has the structure of control system, Air source system, delivery system, Bunker system and Conveying pipeline system，Dust removal and environmental protection pneumatic conveyingSimple structure and advanced technology.，features include Wide range of conveying materials, Reliable operation, Avoid material pollution, Fast conveying speed and be of simple construction。