Introduction to Pneumatic conveying of carbide slag and pneumatic conveying system advantages and features

Pneumatic conveying of carbide slagalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.，the product looks atmospheric.。

1、Brief introduction of Pneumatic conveying of carbide slag

Pneumatic conveying of carbide slagIt uses air energy to continuously convey powder and bulk materials.，The overall structural design is relatively simple and compact.，Structure consists of Air source system, delivery system, dust pelletizing system, Bunker system, control system and so on，widely used inpharmaceutical factory,building material,transportation,logistics,cast and other industries，the advantage is In the conveying process, various technological operations can be carried out at the same time.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、The conveying system is closed.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.，It has a wide range of uses, and is often used inMulti-point transportation,Long-distance and multipoint transportation,cut down on energy consumption,material handling,material handling and so on。

Pneumatic conveying of carbide slag

2、Advantages of Pneumatic conveying of carbide slag principle

Pneumatic conveying of carbide slagat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，Widely used in Bulk material transportation, Process assistance, Long-distance and multipoint transportation, Dust removal and essence and Heating, cooling and drying。

Pneumatic conveying of carbide slag

3、Pneumatic conveying of carbide slag explanation video

The following is the live video of Pneumatic conveying of carbide slag designed and produced by hyde for users, from which we can see the The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、The material is completely closed in the whole conveying process.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、The conveying system is closed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation. of hyde powderPneumatic conveying of carbide slag.。

Pneumatic conveying of carbide slag

As you can see from the live video.，hyde It has the functions of Mixing and classification, cut down on energy consumption, Long distance transportation, Environmental protection and cleaner production and Multi-point transportation。

4、Structural characteristics of Pneumatic conveying of carbide slag

The Pneumatic conveying of carbide slag has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of carbide slag system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Pneumatic conveying of carbide slag system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Pneumatic conveying of carbide slag

5、Pneumatic conveying of carbide slag application

Pneumatic conveying of carbide slags have the following purposes.

1. material handling

Pneumatic conveying of carbide slag system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Dust removal and purification

The Pneumatic conveying of carbide slag system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. Adapt to complex environment

The Pneumatic conveying of carbide slag system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying of carbide slag pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

4. Long-distance and multipoint transportation

The Pneumatic conveying of carbide slag system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pneumatic conveying of carbide slags have important application value in large factories and cross-regional material transportation.

5. Multi-point transportation

The Pneumatic conveying of carbide slag system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Pneumatic conveying of carbide slag

6、Pneumatic conveying of carbide slag price consultation

The Pneumatic conveying of carbide slag price is introduced as follows:

1. product configuration

Usually, the quotation of Pneumatic conveying of carbide slag changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

2. Model type

There are various specifications and models of Pneumatic conveying of carbide slag, and the performance of different specifications and models is quite different. Customers should choose products with appropriate specifications and models according to the actual situation.

3. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. specifications and models

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

5. company strength

The nature of the manufacturer can also greatly affect the price of the Pneumatic conveying of carbide slag. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

Pneumatic conveying of carbide slag

Pneumatic conveying of carbide slagin the course of work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，the product looks beautiful.，is a popular Pneumatic conveying of carbide slag。