What is a Pneumatic conveying of coal ash and slag? Material conveying specifications, models, and parameters

Pneumatic conveying of coal ash and slagthat is, the technology of conveying granular materials in closed pipes by air flow.，is based on hyde is an advanced Pneumatic conveying of coal ash and slag developed by our company in combination with the actual situation of the industry。The following is to introduce the Pneumatic conveying of coal ash and slag:

1、Brief introduction of Pneumatic conveying of coal ash and slag

Pneumatic conveying of coal ash and slagis an efficient and environment-friendly way to transport materials by using the energy of airflow.，it can be used in pharmaceutical factory, transportation, heat-engine plant, logistics, chemical industry and other industries，is a Pneumatic conveying of coal ash and slag，Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，it is widely used inmetallurgy,grain processing,plastic,power,environmental protection and other industries。

Pneumatic conveying of coal ash and slag

2、Pneumatic conveying of coal ash and slag application

Pneumatic conveying of coal ash and slags have the following purposes.

1. save energy and cut emissions

Although the Pneumatic conveying of coal ash and slag system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. material handling

Pneumatic conveying of coal ash and slag system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Adapt to complex environment

The Pneumatic conveying of coal ash and slag system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying of coal ash and slag pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

4. Process assistance

In some production processes, Pneumatic conveying of coal ash and slags are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Pneumatic conveying of coal ash and slag system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. Mixing and classification

In the process of conveying, the Pneumatic conveying of coal ash and slag system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Pneumatic conveying of coal ash and slag

3、Working principle of Pneumatic conveying of coal ash and slag

Pneumatic conveying of coal ash and slagat the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，is a technology to transport solid particulate materials through air flow.，the main structure includes Bunker system, delivery system, delivery system, Conveying pipeline system, control system and so on，Pneumatic conveying of coal ash and slagThe structural design is more advanced and reasonable.，multifunctional, with functions such as Environmental protection and pollution-free, Closed conveying, Automatic control, Physical processing assistance and Physical processing assistance，it is an ideal choice for customers to buy Pneumatic conveying of coal ash and slag。

Pneumatic conveying of coal ash and slag

4、Pneumatic conveying of coal ash and slag advantage

The advantages of Pneumatic conveying of coal ash and slag are as follows:

1. Multiple process operations can be carried out at the same time

The Pneumatic conveying of coal ash and slag system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Pneumatic conveying of coal ash and slags widely used in many industries.

2. High degree of automation

Modern Pneumatic conveying of coal ash and slag systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

3. Improve conveying efficiency

Can transport materials quickly and in large quantities.

4. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

5. energy saving and environmental protection

The Pneumatic conveying of coal ash and slag system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

Pneumatic conveying of coal ash and slag

5、Pneumatic conveying of coal ash and slag structure

The Pneumatic conveying of coal ash and slag structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of coal ash and slag system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Pneumatic conveying of coal ash and slag system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Pneumatic conveying of coal ash and slag system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying of coal ash and slag

6、How much is the Pneumatic conveying of coal ash and slag?

The Pneumatic conveying of coal ash and slag price is introduced as follows:

1. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Pneumatic conveying of coal ash and slag manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Pneumatic conveying of coal ash and slag price can meet the purchasing needs of customers.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

3. Cost input

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

4. regional advantages

The price of Pneumatic conveying of coal ash and slag in jinan, Shandong province is much lower than that in other regions, and hyde is a specialized manufacturer of Pneumatic conveying of coal ash and slag not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Pneumatic conveying of coal ash and slag price positioning more reasonable, low-cost and economical.

5. market demand

Generally, when the supply of Pneumatic conveying of coal ash and slag exceeds the demand in the market, the product price will naturally decrease, on the contrary, the product price will increase.

Pneumatic conveying of coal ash and slag

Pneumatic conveying of coal ash and slagWidely used inEnvironmental protection and cleaner production,Heating, cooling and drying,Mixing and classification,Multi-point transportation,Dust removal and essence and so on，The overall structural design is simple and novel.，it is usually composed of Conveying pipeline system, control system, Conveying pipeline system, dust pelletizing system and Air source system。