Introduction to Denitrification ash transportation, Material conveying specifications, model parameters

Denitrification ash transportationis a technology to transport solid particulate materials through air flow.，Commonly used incut down on energy consumption,Long-distance and multipoint transportation,Reduce pollution,Heating, cooling and drying,Heating, cooling and drying and so on，the main structure includes Conveying pipeline system, control system, dust pelletizing system, Air source system, Bunker system and so on。

1、Brief introduction of Denitrification ash transportation

Denitrification ash transportationis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，the product looks atmospheric.，widely used in logistics, chemical industry, plastic, environmental protection, chemical plant and other fields。

Denitrification ash transportation

2、Denitrification ash transportation characteristics

Denitrification ash transportationfeatures include Convenient operation and management, convenient to use, High conveying efficiency, Less maintenance. and Fast conveying speed，the product looks beautiful.，The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、The materials are completely sealed during transportation.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、High conveying speed, good conveying quality and high conveying efficiency.，widely used inbuild a ship,metallurgy,pharmaceutical factory,cast,heat-engine plant and other industries，is a Denitrification ash transportation。

Denitrification ash transportation

3、Denitrification ash transportation structure

The Denitrification ash transportation structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Denitrification ash transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Denitrification ash transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Denitrification ash transportation

4、Denitrification ash transportation use

The purpose of Denitrification ash transportation is introduced as follows:

1. cut down on energy consumption

Although the power consumption of the Denitrification ash transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. Dust removal and purification

The Denitrification ash transportation system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. material handling

Denitrification ash transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Adapt to complex environment

The Denitrification ash transportation system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Denitrification ash transportation pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Multi-point transportation

The Denitrification ash transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Denitrification ash transportation

5、Denitrification ash transportation structure composition

The Denitrification ash transportation has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Denitrification ash transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Denitrification ash transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Denitrification ash transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Denitrification ash transportation

Denitrification ash transportationis a popular Denitrification ash transportation，generally, it is composed of delivery system, Bunker system, dust pelletizing system, delivery system, Air source system and other major components，productThe structural design is simple, novel and special.。