What is a Rubber particle transportation? pneumatic conveying system specifications, models, and parameters

Rubber particle transportationis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，widely used in building materials, environmental protection, chemical industry, building material, chemical plant and other fields，it has the functions of material handling, Closed conveying, Automatic control, material handling and Explosion-proof involves，In the conveying process, various technological operations can be carried out at the same time.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、The material is completely closed in the whole conveying process.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dust.，the product looks beautiful.。The following is to introduce the Rubber particle transportation:

1、Brief introduction of Rubber particle transportation

Rubber particle transportationis a technology to transport solid particulate materials through air flow.，is a kind of Rubber particle transportation manufactured by hyde。

Rubber particle transportation

2、Introduction of Rubber particle transportation characteristics

Rubber particle transportationfeatures include Safe and reliable, Reduce material loss, Save manpower, energy saving and environmental protection and Flexible conveying distance，Mainly used forcut down on energy consumption,Mixing and classification,Environmental protection and cleaner production,Process assistance andmaterial handling，multifunctional, with functions such as Environmental protection and pollution-free, Automatic control, Closed conveying, Physical processing assistance and Environmental protection and pollution-free，in the course of work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，modern technology，low in price。

Rubber particle transportation

3、Structural advantages of Rubber particle transportation

The Rubber particle transportation has the following structure

1. control system

The control system is the "brain" of the Rubber particle transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Rubber particle transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Rubber particle transportation

4、Working principle of Rubber particle transportation

Rubber particle transportationat work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，the advantage is The whole conveying process is sealed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Can realize the transportation of materials in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.。

Rubber particle transportation

5、Rubber particle transportation HD real picture

Excellent material selection,the product looks atmospheric., trustworthy, panoramic shooting, helpful for customer reference.。

Rubber particle transportation

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Working principle of Rubber particle transportation

Rubber particle transportationthe principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，usually used in logistics, build a ship, build a ship, heat-engine plant, medicine and other fields，It has a wide range of uses, and is often used inBulk material transportation,Multi-point transportation,Reduce pollution,Long-distance and multipoint transportation,Heating, cooling and drying and so on，can be customized according to user's needs.。

Rubber particle transportation

Rubber particle transportationthe advantage is Large conveying capacity, long conveying distance and high conveying quality.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Materials are transported by closed pipelines.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，High production efficiency,Large conveying capacity,Simple operation,Long conveying distance,Simple system。