What is a Pulse material bolt conveying? Introduction to the advantages, characteristics, and principles of the pneumatic conveying

Pulse material bolt conveyingis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，It has the functions of Long distance transportation, Long-distance and multipoint transportation, Dust removal and essence, Environmental protection and cleaner production and Reduce pollution，is a popular Pulse material bolt conveying。

1、Brief introduction of Pulse material bolt conveying

Pulse material bolt conveyingis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，multifunctional, with functions such as Closed conveying, Automatic control, Physical processing assistance, material handling and Closed conveying，the advantage is In the conveying process, various technological operations can be carried out at the same time.、The operation mode is flexible and changeable, and it can run continuously or regularly.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、It is suitable for centralized transportation to one place, and the feeding point can be one or several.、Materials are transported by closed pipelines.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.，structure mainly includes: Air source system, Conveying pipeline system, delivery system, Bunker system, dust pelletizing system and so on，productThe structural design is simple, novel and special.，is a kind of Pulse material bolt conveying manufactured by hyde powder。

Pulse material bolt conveying

2、Pulse material bolt conveying use

The purpose of Pulse material bolt conveying is introduced as follows:

1. Process assistance

In some production processes, Pulse material bolt conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Pulse material bolt conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

2. save energy and cut emissions

Although the Pulse material bolt conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Multi-point transportation

The Pulse material bolt conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. material handling

Pulse material bolt conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Dust removal and purification

The Pulse material bolt conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Pulse material bolt conveying

3、Pulse material bolt conveying use

The purpose of Pulse material bolt conveying is introduced as follows:

1. Mixing and classification

In the process of conveying, the Pulse material bolt conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Adapt to complex environment

The Pulse material bolt conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pulse material bolt conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Pulse material bolt conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. cut down on energy consumption

Although the power consumption of the Pulse material bolt conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Multi-point transportation

The Pulse material bolt conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Pulse material bolt conveying

4、Pulse material bolt conveying principle

Pulse material bolt conveyingat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is a Pulse material bolt conveying，it is widely used in environmental protection, machine building, build a ship, building materials, cast and other industries，is a common Pulse material bolt conveying，the product looks beautiful.。

Pulse material bolt conveying

5、Pulse material bolt conveying structure

The Pulse material bolt conveying structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Pulse material bolt conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pulse material bolt conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Pulse material bolt conveying

Pulse material bolt conveyingFlexible pipeline layout,automation,It is convenient to realize mechanization,automation,Flexible conveying distance，Widely used in material handling, Process assistance, Bulk material transportation, Long distance transportation and cut down on energy consumption。