What is a Roots vacuum pump for pneumatic conveying? Introduction to the advantages and characteristics of the Three leaf Roots blower

Roots vacuum pump for pneumatic conveyingis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the product looks beautiful.，has been favored by more and more customers.。The following is to introduce the Roots vacuum pump for pneumatic conveying:

1、Brief introduction of Roots vacuum pump for pneumatic conveying

Roots vacuum pump for pneumatic conveyingthe models are complete and can meet the needs of different users for different purposes.，smooth operation,wide application range,durable performance,convenient manufacture,low noise。

Roots vacuum pump for pneumatic conveying

2、Roots vacuum pump for pneumatic conveying video detail

The following is the live video of Roots vacuum pump for pneumatic conveying designed and produced by hyde powder for users, from which we can see the The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots vacuum pump for pneumatic conveying less vibration and noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the Roots vacuum pump for pneumatic conveying has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Roots vacuum pump for pneumatic conveying will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption. of Roots vacuum pump for pneumatic conveying.。

Roots vacuum pump for pneumatic conveying

As you can see from the live video.，hyde in the course of work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.。

3、Roots vacuum pump for pneumatic conveying HD picture

Beautiful design, excellent material selection and excellent quality.。

Roots vacuum pump for pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Roots vacuum pump for pneumatic conveying use

Roots vacuum pump for pneumatic conveyingIt has a wide range of uses, including pick up the suction, sewage disposal, Material fluidization, exhaust emission and dry，It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.。

Roots vacuum pump for pneumatic conveying

5、Structural characteristics of Roots vacuum pump for pneumatic conveying

The Roots vacuum pump for pneumatic conveying structure is introduced as follows:

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. impeller

It is the rotating part of the Roots vacuum pump for pneumatic conveying, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots vacuum pump for pneumatic conveying has gradually replaced the two-leaf Roots vacuum pump for pneumatic conveying.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Roots vacuum pump for pneumatic conveying enters and exits.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Roots vacuum pump for pneumatic conveying

6、Brief introduction of Roots vacuum pump for pneumatic conveying

Roots vacuum pump for pneumatic conveyingis a positive displacement blower with forced gas transmission characteristics.。

Roots vacuum pump for pneumatic conveying

Roots vacuum pump for pneumatic conveyingwidely used inpower,smelt,petrochemical industry,chemical fertilizer,sewage disposal and other industries，is a double impeller synchronous compression machine, belonging to a positive displacement blower.，it has the functions of ventilation, material fluidization, pressurized transportation, supply air and cool。