Introduction to Fully mechanical sealed Roots vacuum pump equipment, how much is the price of the blower?

Fully mechanical sealed Roots vacuum pump equipmentthe models are complete and can meet the needs of different users for different purposes.，It is mostly used in mix, exhaust emission, material handling, aeration, pick up the suction, aquaculture and so on，the product looks atmospheric.，the main structure includes fuel tank, impeller, muffler, rotator, case and so on，This productThe structural design is simple, novel and special.，at work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。

1、Brief introduction of Fully mechanical sealed Roots vacuum pump equipment

Fully mechanical sealed Roots vacuum pump equipmentis a double impeller synchronous compression machine, belonging to a positive displacement blower.，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Fully mechanical sealed Roots vacuum pump equipment perform well in many situations where stable airflow is needed.、In the process of air intake and exhaust, the Fully mechanical sealed Roots vacuum pump equipment will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Fully mechanical sealed Roots vacuum pump equipment runs stably and reliably, without contact and wear parts, and has a long service life.，widely used inEnvironmental protection industry,petrochemical industry,port,Textile light textile,aquaculture and other industries。

Fully mechanical sealed Roots vacuum pump equipment

2、Advantages of Fully mechanical sealed Roots vacuum pump equipment principle

Fully mechanical sealed Roots vacuum pump equipmentin the course of work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，multifunctional, with functions such as desulfurization oxidation, dry, exhaust emission, mix and cool，Mainly used forMaterial fluidization,cool,supply air,dehydrate andPressurized transportation。

Fully mechanical sealed Roots vacuum pump equipment

3、Fully mechanical sealed Roots vacuum pump equipment application

Fully mechanical sealed Roots vacuum pump equipmentWidely used in Desulfurization oxidation, sewage disposal, Ventilation, cool and material handling，The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，it is an ideal choice for customers to buy Fully mechanical sealed Roots vacuum pump equipment。

Fully mechanical sealed Roots vacuum pump equipment

4、Fully mechanical sealed Roots vacuum pump equipment structure composition

The Fully mechanical sealed Roots vacuum pump equipment has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. impeller

It is the rotating part of the Fully mechanical sealed Roots vacuum pump equipment, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Fully mechanical sealed Roots vacuum pump equipment has gradually replaced the two-leaf Fully mechanical sealed Roots vacuum pump equipment.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Fully mechanical sealed Roots vacuum pump equipment

5、Fully mechanical sealed Roots vacuum pump equipment work site real shot

High-definition picture display of Fully mechanical sealed Roots vacuum pump equipment, excellent material selection, reliable quality and trustworthy.。

Fully mechanical sealed Roots vacuum pump equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Fully mechanical sealed Roots vacuum pump equipment price consultation

The Fully mechanical sealed Roots vacuum pump equipment price is introduced as follows:

1. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

2. Quality advantages and disadvantages

The quality of the Fully mechanical sealed Roots vacuum pump equipment is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the Fully mechanical sealed Roots vacuum pump equipment price.

3. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

4. Reasonable cost

A Fully mechanical sealed Roots vacuum pump equipment needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

5. Brand strength

At present, there are various brands of Fully mechanical sealed Roots vacuum pump equipment in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Fully mechanical sealed Roots vacuum pump equipment are different.

Fully mechanical sealed Roots vacuum pump equipment

Fully mechanical sealed Roots vacuum pump equipmentthe main structure includes case, muffler, rotator, wallboard, bearing and so on，Fully mechanical sealed Roots vacuum pump equipmentThe overall structural design is relatively simple and compact.，features include strong adaptability, convenient maintenance, wide application range, low noise and smooth operation。