Introduction to 316L Roots vacuum pump unit, introduction to Roots Blower advantages and characteristics

316L Roots vacuum pump unitthe models are complete and can meet the needs of different users for different purposes.，the advantage is The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 316L Roots vacuum pump unit perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Because of the design of three-blade rotor, the 316L Roots vacuum pump unit has little vibration and low noise during operation, and the operation is stable and reliable、Small size and small floor space make it easy to arrange and install in places with limited space.，it is widely used in Environmental protection industry, mine, Dust removal, aquaculture, water treatment and other industries，is developed and improved by hyde。

1、Brief introduction of 316L Roots vacuum pump unit

316L Roots vacuum pump unitis an efficient volumetric gas conveying and pressurizing equipment.，the advantage is Due to the adoption of synchronous gear transmission and small gap design, the 316L Roots vacuum pump unit runs stably and reliably, without contact and wear parts, and has a long service life.、In the process of air intake and exhaust, the 316L Roots vacuum pump unit will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 316L Roots vacuum pump unit perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，is a 316L Roots vacuum pump unit newly developed by hyde powder。

316L Roots vacuum pump unit

2、316L Roots vacuum pump unit characteristics

316L Roots vacuum pump unitfeatures include energy-efficient, convenient manufacture, smooth operation, economical and durable and Precise control，is developed and improved by hyde。

316L Roots vacuum pump unit

3、316L Roots vacuum pump unit use

316L Roots vacuum pump unitIt has a wide range of uses, including exhaust emission, Material fluidization, cool, aquaculture and Desulfurization oxidation，has been favored by more and more customers.。

316L Roots vacuum pump unit

4、Structural advantages of 316L Roots vacuum pump unit

The 316L Roots vacuum pump unit has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. impeller

It is the rotating part of the 316L Roots vacuum pump unit, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf 316L Roots vacuum pump unit has gradually replaced the two-leaf 316L Roots vacuum pump unit.

3. impeller

It is the rotating part of the 316L Roots vacuum pump unit, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf 316L Roots vacuum pump unit has gradually replaced the two-leaf 316L Roots vacuum pump unit.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the 316L Roots vacuum pump unit, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

316L Roots vacuum pump unit

5、Functional advantages of 316L Roots vacuum pump unit

316L Roots vacuum pump units have the following advantages.

1. Long service life

The mechanical friction of the 316L Roots vacuum pump unit is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Reliable operation and convenient maintenance

The air volume of the 316L Roots vacuum pump unit is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the 316L Roots vacuum pump unit perform well in many situations where stable airflow is needed.

3. Durable performance

The impeller and shaft of the 316L Roots vacuum pump unit are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

4. Wide application range

The 316L Roots vacuum pump unit is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

5. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

316L Roots vacuum pump unit

6、Structural characteristics of 316L Roots vacuum pump unit

The 316L Roots vacuum pump unit structure is introduced as follows:

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. muffler

Used to reduce the noise caused by airflow pulsation when the 316L Roots vacuum pump unit enters and exits.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. impeller

It is the rotating part of the 316L Roots vacuum pump unit, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf 316L Roots vacuum pump unit has gradually replaced the two-leaf 316L Roots vacuum pump unit.

316L Roots vacuum pump unit

316L Roots vacuum pump unitis a 316L Roots vacuum pump unit，multifunctional, with functions such as sewage disposal, dehydrate, mix, ventilation and exhaust emission。