What is a Three leaf Roots vacuum pump? Introduction to the principle of blower structure

Three leaf Roots vacuum pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.。

1、Brief introduction of Three leaf Roots vacuum pump

Three leaf Roots vacuum pumpis an efficient volumetric gas conveying and pressurizing equipment.，has been favored by more and more customers.。

Three leaf Roots vacuum pump

2、Introduction of advantages of Three leaf Roots vacuum pump

Three leaf Roots vacuum pumps have the following advantages.

1. Low noise

The three-leaf rotor structure of the Three leaf Roots vacuum pump makes it less vibration and noise. This feature makes the Three leaf Roots vacuum pump work normally in situations where a quiet environment is needed.

2. energy-efficient

The Three leaf Roots vacuum pump has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Long service life

The mechanical friction of the Three leaf Roots vacuum pump is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

4. Stable air output

The Three leaf Roots vacuum pump has simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.

5. Durable performance

The impeller and shaft of the Three leaf Roots vacuum pump are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

Three leaf Roots vacuum pump

3、Working principle of Three leaf Roots vacuum pump

Three leaf Roots vacuum pumpat work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，was developed and designed by hyde。

Three leaf Roots vacuum pump

4、Structural advantages of Three leaf Roots vacuum pump

The Three leaf Roots vacuum pump has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots vacuum pump enters and exits.

5. impeller

It is the rotating part of the Three leaf Roots vacuum pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots vacuum pump has gradually replaced the two-leaf Three leaf Roots vacuum pump.

Three leaf Roots vacuum pump

5、Three leaf Roots vacuum pump application

Three leaf Roots vacuum pumpIt has a wide range of uses, including Desulfurization oxidation, Pressurized transportation, Ventilation, supply air and mix，the product looks atmospheric.。

Three leaf Roots vacuum pump

6、Three leaf Roots vacuum pump use

Three leaf Roots vacuum pumpIt can be used for supply air, aeration, cool, Desulfurization oxidation, aquaculture, pick up the suction and so on，at runtime,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Three leaf Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、Because of the design of three-blade rotor, the Three leaf Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots vacuum pump less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.，it is an ideal choice for customers to buy Three leaf Roots vacuum pump。

Three leaf Roots vacuum pump

Three leaf Roots vacuum pumpis a positive displacement blower.，the advantage is In the process of air intake and exhaust, the Three leaf Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots vacuum pump perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.。