Introduction to Three leaf Roots blower for pneumatic ash conveying and Three leaf Roots blower working principle

Three leaf Roots blower for pneumatic ash conveyingthe models are complete and can meet the needs of different users for different purposes.，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for pneumatic ash conveying perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for pneumatic ash conveying runs stably and reliably, without contact and wear parts, and has a long service life.，it is usually composed of case, muffler, impeller, fuel tank and bearing，be loved by our customers.。The following is to introduce the Three leaf Roots blower for pneumatic ash conveying:

1、Brief introduction of Three leaf Roots blower for pneumatic ash conveying

Three leaf Roots blower for pneumatic ash conveyingis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，structure mainly includes: wallboard, rotator, bearing, muffler, rotator and so on，Mainly used formaterial handling,supply air,Pressurized transportation,sewage disposal andaquaculture，support customization。

Three leaf Roots blower for pneumatic ash conveying

2、Three leaf Roots blower for pneumatic ash conveying characteristics

Three leaf Roots blower for pneumatic ash conveyingit has the characteristics of low noise, Precise control, run smoothly, smooth operation and durable performance，the product looks atmospheric.，at the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，the main structure includes case, wallboard, impeller, fuel tank and impeller，This Three leaf Roots blower for pneumatic ash conveyingThe overall structural design is relatively simple，it has the functions of sewage disposal, aeration, dehydrate, cool and pressurized transportation。

Three leaf Roots blower for pneumatic ash conveying

3、Advantages of Three leaf Roots blower for pneumatic ash conveying principle

Three leaf Roots blower for pneumatic ash conveyingat work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，features include energy-efficient, Precise control, low noise, wide application range and strong adaptability，is a popular Three leaf Roots blower for pneumatic ash conveying，it can be used in Textile light textile, make paper, power, sewage disposal, Textile light textile and other industries，the product looks atmospheric.。

Three leaf Roots blower for pneumatic ash conveying

4、Three leaf Roots blower for pneumatic ash conveying use

Three leaf Roots blower for pneumatic ash conveyingCommonly used inaeration,dry,supply air,cool,mix and so on，is designed by hyde powder with advanced technology。

Three leaf Roots blower for pneumatic ash conveying

5、Introduction of advantages of Three leaf Roots blower for pneumatic ash conveying

Three leaf Roots blower for pneumatic ash conveyings have the following advantages.

1. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

2. Low noise and vibration

The three-leaf rotor structure of the Three leaf Roots blower for pneumatic ash conveying makes it less vibration and noise. This feature makes the Three leaf Roots blower for pneumatic ash conveying work normally in situations where a quiet environment is needed.

3. Convenient maintenance

The structure of the Three leaf Roots blower for pneumatic ash conveying is relatively simple and easy to maintain.

4. Durable performance

The impeller and shaft of the Three leaf Roots blower for pneumatic ash conveying are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

5. Compact structure and small floor space.

The Three leaf Roots blower for pneumatic ash conveying is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

Three leaf Roots blower for pneumatic ash conveying

6、hyde's after-sales service

Perfect service: In order to improve the service quality and improve the service level, hyde powder has set up a sound quality management department and a professional after-sales service team, so as to be highly responsible for customers and avoid their worries in the use process.。

hyde

Three leaf Roots blower for pneumatic ash conveyingwidely used in power, make paper, manufacturing industry, chemical fertilizer, water treatment and other fields，at work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，is an efficient volumetric gas conveying and pressurizing equipment.。