What is a Printing factory Roots blower? Introduction to the advantages and characteristics of the blower

Printing factory Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，convenient maintenance,run smoothly,wide application range,be of simple construction,convenient maintenance，it is an ideal choice for customers to buy Printing factory Roots blower。The following is to introduce the Printing factory Roots blower:

1、Brief introduction of Printing factory Roots blower

Printing factory Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

Printing factory Roots blower

2、Printing factory Roots blower display

The Printing factory Roots blower is designed by hyde powder with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory blower more quickly, the following high-definition pictures are provided for reference.。

Printing factory Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Printing factory Roots blower function

Printing factory Roots blowerit has the functions of aeration, desulfurization oxidation, sewage disposal, material fluidization and pressurized transportation，features include durable performance, smooth operation, energy-efficient, convenient manufacture and be of simple construction，at work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，the advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Printing factory Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Printing factory Roots blower less vibration and noise.、Because of the design of three-blade rotor, the Printing factory Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，be loved by our customers.。

Printing factory Roots blower

4、Structural characteristics of Printing factory Roots blower

The Printing factory Roots blower structure is introduced as follows:

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Printing factory Roots blower enters and exits.

4. impeller

It is the rotating part of the Printing factory Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Printing factory Roots blower has gradually replaced the two-leaf Printing factory Roots blower.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Printing factory Roots blower

5、Working principle of Printing factory Roots blower

Printing factory Roots blowerat work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，it has the characteristics of wide application range, low noise, stable and reliable, run smoothly and strong adaptability，is a popular Printing factory Roots blower，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Printing factory Roots blower perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Printing factory Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，the product looks atmospheric.。

Printing factory Roots blower

6、Company preferential activities

Printing factory Roots blower is a new type of blower introduced by Shandong Haide Fenti Engineering Co., Ltd. manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for smelt and other industries. Now consult hydeproduction and processing的Printing factory Roots blower, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde powder

Printing factory Roots blowerit is mainly composed of muffler, fuel tank, bearing, wallboard and impeller，This Printing factory Roots blowerThe structural design is simple, novel and special.，it has been widely used in petrochemical industry, port, Environmental protection industry, aquaculture, mine and other industries，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。