What is a Three leaf Roots blower for thermal power plant? Introduction to the advantages and characteristics of the Roots Blower

Three leaf Roots blower for thermal power plantis a double impeller synchronous compression machine, belonging to a positive displacement blower.，it is an ideal choice for customers to buy Three leaf Roots blower for thermal power plant。

1、Brief introduction of Three leaf Roots blower for thermal power plant

Three leaf Roots blower for thermal power planta rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，It is a product series that integrates pick up the suction, supply air, cool, Material fluidization and Ventilation。

Three leaf Roots blower for thermal power plant

2、Three leaf Roots blower for thermal power plant HD picture real shot

The Three leaf Roots blower for thermal power plant has a beautiful appearance and atmosphere for our customers' reference.。

Three leaf Roots blower for thermal power plant

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Introduction of Three leaf Roots blower for thermal power plant characteristics

Three leaf Roots blower for thermal power plantthe main features are low noise, Precise control, smooth operation, durable performance and convenient maintenance，it can be used in Textile light textile, petrochemical industry, pneumatic transport, smelt, petrify and other industries，It has a wide range of uses, including aeration, mix, exhaust emission, material handling and Pressurized transportation，is a kind of high quality and low price Three leaf Roots blower for thermal power plant，at runtime,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

Three leaf Roots blower for thermal power plant

4、Three leaf Roots blower for thermal power plant function

Three leaf Roots blower for thermal power plantmultifunctional, with functions such as ventilation, dry, exhaust emission, pressurized transportation and sewage disposal，It is a product series that integrates dehydrate, aquaculture, sewage disposal, Desulfurization oxidation and aquaculture，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，be of high quality。

Three leaf Roots blower for thermal power plant

5、Structural advantages of Three leaf Roots blower for thermal power plant

The Three leaf Roots blower for thermal power plant has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots blower for thermal power plant, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots blower for thermal power plant enters and exits.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Three leaf Roots blower for thermal power plant

Three leaf Roots blower for thermal power plantis a popular Three leaf Roots blower for thermal power plant，the advantage is Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the Three leaf Roots blower for thermal power plant will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for thermal power plant runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Three leaf Roots blower for thermal power plant has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for thermal power plant less vibration and noise.。