What is a Roots blower in textile factory? Introduction to the advantages and characteristics of blower functions

Roots blower in textile factoryis a double impeller synchronous compression machine, belonging to a positive displacement blower.，it has the structure of rotator, bearing, case, fuel tank and impeller，It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower in textile factory perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the Roots blower in textile factory has little vibration and low noise during operation, and the operation is stable and reliable，it is widely used inFood and beverage processing,mine,smelt,port,make paper and other industries，has been favored by more and more customers.。The following is to introduce the Roots blower in textile factory:

1、Brief introduction of Roots blower in textile factory

Roots blower in textile factoryis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.。

Roots blower in textile factory

2、Roots blower in textile factory structure composition

The Roots blower in textile factory structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower in textile factory enters and exits.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower in textile factory, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Roots blower in textile factory

3、Roots blower in textile factory advantage

The advantages of Roots blower in textile factory are as follows:

1. Reliable operation and convenient maintenance

The Roots blower in textile factory has simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Convenient maintenance

The structure of the Roots blower in textile factory is relatively simple and easy to maintain.

4. Low noise and vibration

The three-leaf rotor structure of the Roots blower in textile factory makes it less vibration and noise. This feature makes the Roots blower in textile factory work normally in situations where a quiet environment is needed.

5. Convenient maintenance

The structure of the Roots blower in textile factory is relatively simple and easy to maintain.

Roots blower in textile factory

4、Roots blower in textile factory characteristics

Roots blower in textile factorythe main features are strong adaptability, stable and reliable, smooth operation, run smoothly and strong adaptability，When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

Roots blower in textile factory

5、Roots blower in textile factory function

Roots blower in textile factoryit has the functions of dehydrate, sewage disposal, cool, pressurized transportation and aeration，It has the functions of cool, exhaust emission, material handling, dehydrate and aquaculture，at work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，it is an ideal choice for customers to buy Roots blower in textile factory。

Roots blower in textile factory

6、High-definition map of hyde workshop

The finished products of the Roots blower in textile factory factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde powder

The finished products of the Roots blower in textile factory factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Roots blower in textile factoryit has the functions of dry, dehydrate, material fluidization, exhaust emission and material handling，widely used in petrochemical industry, manufacturing industry, petrify, water treatment, sewage disposal and other fields，it mainly includes fuel tank, bearing, case, rotator and muffler，Roots blower in textile factoryThe structure is novel, special, advanced, reasonable and scientific.。