Introduction to Lu's blower in electroplating factory, Three leaf Roots blower specifications, model parameters

Lu's blower in electroplating factoryis a positive displacement blower with forced gas transmission characteristics.，it is usually composed of impeller, muffler, wallboard, bearing and fuel tank，Lu's blower in electroplating factoryThe overall structural design is relatively simple，the product looks beautiful.，it can be used in pneumatic transport, chemical fertilizer, Pharmaceutical and chemical industries, petrify, water treatment and other industries，at runtime,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。The following is to introduce the Lu's blower in electroplating factory:

1、Brief introduction of Lu's blower in electroplating factory

Lu's blower in electroplating factorythe models are complete and can meet the needs of different users for different purposes.，It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、In the process of air intake and exhaust, the Lu's blower in electroplating factory will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Lu's blower in electroplating factory runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，Simple structure and advanced technology.，it is mainly composed of rotator, case, wallboard, muffler and case。

Lu's blower in electroplating factory

2、Lu's blower in electroplating factory advantage

The advantages of Lu's blower in electroplating factory are as follows:

1. Low noise and vibration

The three-leaf rotor structure of the Lu's blower in electroplating factory makes it less vibration and noise. This feature makes the Lu's blower in electroplating factory work normally in situations where a quiet environment is needed.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

4. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

5. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

Lu's blower in electroplating factory

3、Introduction of Lu's blower in electroplating factory characteristics

Lu's blower in electroplating factorystrong adaptability,run smoothly,energy-efficient,smooth operation,low noise，the main structure includes bearing, impeller, rotator, fuel tank and fuel tank，Lu's blower in electroplating factoryThe overall structural design is simple and novel.，multifunctional, with functions such as pick up the suction, material handling, desulfurization oxidation, supply air and sewage disposal，widely used in Environmental protection industry, make paper, sewage disposal, Dust removal, petrochemical industry and other fields，it is an ideal choice for customers to buy Lu's blower in electroplating factory。

Lu's blower in electroplating factory

4、Working principle of Lu's blower in electroplating factory

Lu's blower in electroplating factoryGas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，Widely used inmaterial handling,supply air,dehydrate,Desulfurization oxidation,aquaculture and so on，the advantage is In the process of air intake and exhaust, the Lu's blower in electroplating factory will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Lu's blower in electroplating factory less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the Lu's blower in electroplating factory runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

Lu's blower in electroplating factory

5、Structural advantages of Lu's blower in electroplating factory

The Lu's blower in electroplating factory has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Lu's blower in electroplating factory enters and exits.

5. impeller

It is the rotating part of the Lu's blower in electroplating factory, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Lu's blower in electroplating factory has gradually replaced the two-leaf Lu's blower in electroplating factory.

Lu's blower in electroplating factory

Lu's blower in electroplating factoryMainly used formix,Ventilation,Pressurized transportation,cool andexhaust emission，is a Lu's blower in electroplating factory，it has the functions of mix, aquaculture, material fluidization, exhaust emission and cool。