Introduction to Electroplating factory Roots blower, introduction to blower function advantages and characteristics

Electroplating factory Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，It has the functions of aquaculture, pick up the suction, supply air, Material fluidization and mix，it is mainly composed of case, fuel tank, rotator, impeller and muffler，This productThe structural design is simple, novel and special.，was developed and designed by hyde powder。The following is to introduce the Electroplating factory Roots blower:

1、Brief introduction of Electroplating factory Roots blower

Electroplating factory Roots bloweris a positive displacement blower.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Electroplating factory Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the Electroplating factory Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，is a popular Electroplating factory Roots blower，is carefully developed by hyde combined with advanced technology。

Electroplating factory Roots blower

2、Electroplating factory Roots blower introduction video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Electroplating factory Roots blowert operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Electroplating factory Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the product looks beautiful.。

3、Advantages of Electroplating factory Roots blower principle

Electroplating factory Roots blowerat the start of the operation,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，the product looks atmospheric.。

Electroplating factory Roots blower

4、Structural characteristics of Electroplating factory Roots blower

The Electroplating factory Roots blower has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Electroplating factory Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Electroplating factory Roots blower enters and exits.

5. impeller

It is the rotating part of the Electroplating factory Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Electroplating factory Roots blower has gradually replaced the two-leaf Electroplating factory Roots blower.

Electroplating factory Roots blower

5、Introduction of Electroplating factory Roots blower characteristics

Electroplating factory Roots blowerit has the characteristics of Precise control, be of simple construction, wide application range, economical and durable and convenient manufacture，the models are complete and can meet the needs of different users for different purposes.，customizable。

Electroplating factory Roots blower

6、Electroplating factory Roots blower application

Electroplating factory Roots blowerWidely used inDesulfurization oxidation,cool,dry,dehydrate,material handling and so on。

Electroplating factory Roots blower

Electroplating factory Roots bloweris a Electroplating factory Roots blower，is a common Electroplating factory Roots blower，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes bearing, case, wallboard, impeller and rotator。