Introduction to Factory Lushi blower, advantages, characteristics and principles of Three leaf Roots blower

Factory Lushi bloweris a positive displacement blower with forced gas transmission characteristics.，customizable。

1、Brief introduction of Factory Lushi blower

Factory Lushi bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.，multifunctional, with functions such as dehydrate, cool, pressurized transportation, aquaculture and sewage disposal。

Factory Lushi blower

2、Functional advantages of Factory Lushi blower

Factory Lushi blowers have the following advantages.

1. Long service life

The mechanical friction of the Factory Lushi blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

3. energy-efficient

The Factory Lushi blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

4. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

5. Long service life

The mechanical friction of the Factory Lushi blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Factory Lushi blower

3、Working principle of Factory Lushi blower

Factory Lushi blowerin the course of work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it has the characteristics of be of simple construction, stable and reliable, wide application range, run smoothly and economical and durable，it has the functions of aeration, material handling, supply air, pick up the suction and ventilation，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the Factory Lushi blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Factory Lushi blower perform well in many situations where stable airflow is needed.、Because of the design of three-blade rotor, the Factory Lushi blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Factory Lushi blower less vibration and noise.。

Factory Lushi blower

4、Structural advantages of Factory Lushi blower

The Factory Lushi blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Factory Lushi blower enters and exits.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Factory Lushi blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. impeller

It is the rotating part of the Factory Lushi blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Factory Lushi blower has gradually replaced the two-leaf Factory Lushi blower.

Factory Lushi blower

5、Factory Lushi blower HD real shot

On-site aerial photography of Factory Lushi blower。

Factory Lushi blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. widely used in pneumatic transport, water treatment, pottery and porcelain, smelt, Textile light textile and other fields。

Factory Lushi blowerat the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，the product looks beautiful.。