What is a Blowing and aerating Roots blower? blower specifications, models, and parameters

Blowing and aerating Roots bloweris a positive displacement blower with forced gas transmission characteristics.，strong adaptability,convenient maintenance,smooth operation,convenient manufacture,wide application range。The following is to introduce the Blowing and aerating Roots blower:

1、Brief introduction of Blowing and aerating Roots blower

Blowing and aerating Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，is a Blowing and aerating Roots blower，In the process of air intake and exhaust, the Blowing and aerating Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Blowing and aerating Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Blowing and aerating Roots blower less vibration and noise.。

Blowing and aerating Roots blower

2、Introduction of Blowing and aerating Roots blower characteristics

Blowing and aerating Roots blowerfeatures include durable performance, economical and durable, energy-efficient, convenient maintenance and Precise control，usually used in petrochemical industry, pottery and porcelain, Pharmaceutical and chemical industries, pneumatic transport, water treatment and other fields，Commonly used indry,exhaust emission,aquaculture,cool,sewage disposal and so on，customizable。

Blowing and aerating Roots blower

3、Introduction of advantages of Blowing and aerating Roots blower

Blowing and aerating Roots blowers have the following advantages.

1. Convenient maintenance

The structure of the Blowing and aerating Roots blower is relatively simple and easy to maintain.

2. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

3. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

4. Long service life

The mechanical friction of the Blowing and aerating Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Convenient maintenance

The structure of the Blowing and aerating Roots blower is relatively simple and easy to maintain.

Blowing and aerating Roots blower

4、Blowing and aerating Roots blower principle

Blowing and aerating Roots blowerWhen the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，It can be used for aeration, pick up the suction, dry, mix, Pressurized transportation, Desulfurization oxidation and so on，is a common Blowing and aerating Roots blower，the main features are wide application range, low noise, run smoothly, smooth operation and wide application range，is a kind of high quality and low price Blowing and aerating Roots blower。

Blowing and aerating Roots blower

5、Blowing and aerating Roots blower use

Blowing and aerating Roots blowerIt is a product series that integrates material handling, Material fluidization, mix, pick up the suction and Pressurized transportation。

Blowing and aerating Roots blower

Blowing and aerating Roots blowerThe structure is novel, special, advanced, reasonable and scientific.，it has the structure of fuel tank, rotator, case, muffler and wallboard，economical and durable,be of simple construction,strong adaptability,durable performance,stable and reliable，It has a wide range of uses, and is often used inDesulfurization oxidation,Ventilation,material handling,supply air,dehydrate and so on。