Introduction to Three leaf Roots blower for light hydrocarbon gas transportation, how much is the price of the Three leaf Roots blower?

Three leaf Roots blower for light hydrocarbon gas transportationis an efficient volumetric gas conveying and pressurizing equipment.，the advantage is The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for light hydrocarbon gas transportation perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、In the process of air intake and exhaust, the Three leaf Roots blower for light hydrocarbon gas transportation will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Because of the design of three-blade rotor, the Three leaf Roots blower for light hydrocarbon gas transportation has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，multifunctional, with functions such as pick up the suction, dehydrate, material fluidization, aquaculture and supply air，in the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，Structure consists of bearing, wallboard, rotator, impeller, rotator and so on，This productThe overall structural design is simple and novel.。

1、Brief introduction of Three leaf Roots blower for light hydrocarbon gas transportation

Three leaf Roots blower for light hydrocarbon gas transportationthe models are complete and can meet the needs of different users for different purposes.，the advantage is Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for light hydrocarbon gas transportation runs stably and reliably, without contact and wear parts, and has a long service life.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for light hydrocarbon gas transportation less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for light hydrocarbon gas transportation perform well in many situations where stable airflow is needed.，is developed and improved by hyde。

Three leaf Roots blower for light hydrocarbon gas transportation

2、Three leaf Roots blower for light hydrocarbon gas transportation customer scene picture

The beauty of Three leaf Roots blower for light hydrocarbon gas transportation comes from the detail design.。

Three leaf Roots blower for light hydrocarbon gas transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Functional advantages of Three leaf Roots blower for light hydrocarbon gas transportation

Three leaf Roots blower for light hydrocarbon gas transportations have the following advantages.

1. Strong adaptability

Three leaf Roots blower for light hydrocarbon gas transportations are widely used in many fields, such as smelt, etc., especially suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

2. Stable air output

The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for light hydrocarbon gas transportation less vibration and noise.

3. Compact structure and small floor space.

The Three leaf Roots blower for light hydrocarbon gas transportation is simple in design and easy to manufacture and maintain.

4. Wide application range

The Three leaf Roots blower for light hydrocarbon gas transportation is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

5. Convenient maintenance

The structure of the Three leaf Roots blower for light hydrocarbon gas transportation is relatively simple and easy to maintain.

Three leaf Roots blower for light hydrocarbon gas transportation

4、Advantages of Three leaf Roots blower for light hydrocarbon gas transportation principle

Three leaf Roots blower for light hydrocarbon gas transportationthe principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，It is mostly used in dehydrate, dry, Ventilation, exhaust emission, aeration, mix and so on，it is usually composed of bearing, fuel tank, wallboard, case and muffler，it is an ideal choice for customers to buy Three leaf Roots blower for light hydrocarbon gas transportation。

Three leaf Roots blower for light hydrocarbon gas transportation

5、Structural advantages of Three leaf Roots blower for light hydrocarbon gas transportation

The Three leaf Roots blower for light hydrocarbon gas transportation has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. impeller

It is the rotating part of the Three leaf Roots blower for light hydrocarbon gas transportation, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for light hydrocarbon gas transportation has gradually replaced the two-leaf Three leaf Roots blower for light hydrocarbon gas transportation.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Three leaf Roots blower for light hydrocarbon gas transportation

6、Three leaf Roots blower for light hydrocarbon gas transportation function

Three leaf Roots blower for light hydrocarbon gas transportationmultifunctional, with functions such as mix, sewage disposal, pressurized transportation, cool and material handling，at runtime,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，Mainly used foraquaculture,Pressurized transportation,material handling,cool andMaterial fluidization，Because of the design of three-blade rotor, the Three leaf Roots blower for light hydrocarbon gas transportation has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Three leaf Roots blower for light hydrocarbon gas transportation will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for light hydrocarbon gas transportation less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for light hydrocarbon gas transportation runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.，can be customized according to user's needs.。

Three leaf Roots blower for light hydrocarbon gas transportation

Three leaf Roots blower for light hydrocarbon gas transportationthe product looks atmospheric.，at work,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，the product looks beautiful.。