What is a Anti corrosion Roots blower? Introduction to the advantages, characteristics, and principles of the Three leaf Roots blower

Anti corrosion Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it has the functions of material handling, supply air, material fluidization, sewage disposal and pick up the suction，features include wide application range, convenient manufacture, wide application range, durable performance and convenient maintenance，super quality and competitive price。The following is to introduce the Anti corrosion Roots blower:

1、Brief introduction of Anti corrosion Roots blower

Anti corrosion Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，it has been widely used in aquaculture, power, Flue gas treatment, Environmental protection industry, chemical fertilizer and other industries，It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Anti corrosion Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the Anti corrosion Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Anti corrosion Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Anti corrosion Roots blower less vibration and noise.，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，it is an ideal choice for customers to buy Anti corrosion Roots blower。

Anti corrosion Roots blower

2、Anti corrosion Roots blower function

Anti corrosion Roots blowerit has the functions of dehydrate, cool, pressurized transportation, aquaculture and ventilation。

Anti corrosion Roots blower

3、Structural characteristics of Anti corrosion Roots blower

The Anti corrosion Roots blower structure is introduced as follows:

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Anti corrosion Roots blower enters and exits.

3. impeller

It is the rotating part of the Anti corrosion Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Anti corrosion Roots blower has gradually replaced the two-leaf Anti corrosion Roots blower.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Anti corrosion Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Anti corrosion Roots blower

4、Anti corrosion Roots blower explanation video

Speak directly with facts on the spot。

Anti corrosion Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. multifunctional, with functions such as exhaust emission, dry, desulfurization oxidation, mix and aeration。

5、Anti corrosion Roots blower real beat

The Anti corrosion Roots blower is designed by hyde powder with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory Three leaf Roots blower more quickly, the following high-definition pictures are provided for reference.。

Anti corrosion Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Anti corrosion Roots blower price concessions

The Anti corrosion Roots blower price is introduced as follows:

1. Quality advantages and disadvantages

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

2. Manufacturer's strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Anti corrosion Roots blower. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Anti corrosion Roots blower will be different.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Anti corrosion Roots blower price and service can meet the actual needs of customers.

5. market factors

In order to build their own brands, some manufacturers deliberately reduce the price of Anti corrosion Roots blower. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

Anti corrosion Roots blower

Anti corrosion Roots blowerit is widely used in petrochemical industry, manufacturing industry, Textile light textile, Pharmaceutical and chemical industries, Food and beverage processing and other industries，the advantage is The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Anti corrosion Roots blower perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。