What is a Low noise water-cooled Roots blower? blower specifications, models, and parameters

Low noise water-cooled Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，be loved by our customers.。The following is to introduce the Low noise water-cooled Roots blower:

1、Brief introduction of Low noise water-cooled Roots blower

Low noise water-cooled Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。

Low noise water-cooled Roots blower

2、Introduction of advantages of Low noise water-cooled Roots blower

Low noise water-cooled Roots blowers have the following advantages.

1. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

2. Long service life

The mechanical friction of the Low noise water-cooled Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

3. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

4. energy-efficient

The Low noise water-cooled Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

5. Convenient maintenance

The structure of the Low noise water-cooled Roots blower is relatively simple and easy to maintain.

Low noise water-cooled Roots blower

3、Low noise water-cooled Roots blower function

Low noise water-cooled Roots blowerit has the functions of material fluidization, pressurized transportation, pick up the suction, ventilation and exhaust emission，is a common Low noise water-cooled Roots blower，The structure is novel, special, advanced, reasonable and scientific.，it has the structure of bearing, fuel tank, case, muffler and wallboard，is carefully developed by hyde powder combined with advanced technology。

Low noise water-cooled Roots blower

4、Low noise water-cooled Roots blower real beat

Low noise water-cooled Roots blower styles and designs are diverse, specifications and models can be customized according to customer needs, providing high-definition pictures for new and old customers' reference.。

Low noise water-cooled Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Structural characteristics of Low noise water-cooled Roots blower

The Low noise water-cooled Roots blower has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. impeller

It is the rotating part of the Low noise water-cooled Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Low noise water-cooled Roots blower has gradually replaced the two-leaf Low noise water-cooled Roots blower.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Low noise water-cooled Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Low noise water-cooled Roots blower

6、Low noise water-cooled Roots blower structure composition

The Low noise water-cooled Roots blower has the following structure

1. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

2. impeller

It is the rotating part of the Low noise water-cooled Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Low noise water-cooled Roots blower has gradually replaced the two-leaf Low noise water-cooled Roots blower.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Low noise water-cooled Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Low noise water-cooled Roots blower

Low noise water-cooled Roots blowerIt can be used for dehydrate, pick up the suction, aquaculture, material handling, Material fluidization, Desulfurization oxidation and so on，wide application range,be of simple construction,energy-efficient,durable performance,run smoothly，the main structure includes case, muffler, wallboard, impeller and rotator。