Introduction to High pressure water-cooled three blade Roots blower, Roots Blower specifications, model parameters

High pressure water-cooled three blade Roots blowerthe models are complete and can meet the needs of different users for different purposes.，at the start of the operation,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.。

1、Brief introduction of High pressure water-cooled three blade Roots blower

High pressure water-cooled three blade Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，features include economical and durable, wide application range, stable and reliable, smooth operation and run smoothly，the product looks atmospheric.，support customization。

High pressure water-cooled three blade Roots blower

2、High pressure water-cooled three blade Roots blower HD picture real shot

There are many specifications and models of High pressure water-cooled three blade Roots blower, which can be selected by users at will. The high-definition factory map is available for our customers to visit.。

High pressure water-cooled three blade Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、High pressure water-cooled three blade Roots blower structure composition

The High pressure water-cooled three blade Roots blower structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High pressure water-cooled three blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. muffler

Used to reduce the noise caused by airflow pulsation when the High pressure water-cooled three blade Roots blower enters and exits.

3. impeller

It is the rotating part of the High pressure water-cooled three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf High pressure water-cooled three blade Roots blower has gradually replaced the two-leaf High pressure water-cooled three blade Roots blower.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

High pressure water-cooled three blade Roots blower

4、Functional advantages of High pressure water-cooled three blade Roots blower

High pressure water-cooled three blade Roots blowers have the following advantages.

1. Convenient maintenance

The structure of the High pressure water-cooled three blade Roots blower is relatively simple and easy to maintain.

2. energy-efficient

The High pressure water-cooled three blade Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Compact structure and small floor space.

The High pressure water-cooled three blade Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

4. Strong adaptability

High pressure water-cooled three blade Roots blowers are widely used in many fields, such as petrochemical industry, etc., especially suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

5. Smooth operation

The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the High pressure water-cooled three blade Roots blower less vibration and noise.

High pressure water-cooled three blade Roots blower

5、High pressure water-cooled three blade Roots blower function

High pressure water-cooled three blade Roots blowermultifunctional, with functions such as pick up the suction, material fluidization, pressurized transportation, aquaculture and supply air，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，it is an ideal choice for customers to buy High pressure water-cooled three blade Roots blower。

High pressure water-cooled three blade Roots blower

6、High pressure water-cooled three blade Roots blower application

High pressure water-cooled three blade Roots blowerIt is a product series that integrates sewage disposal, aquaculture, material handling, Ventilation and pick up the suction，the product looks beautiful.，Simple structure and reliable operation.，the main structure includes fuel tank, muffler, bearing, wallboard, impeller and so on，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，is a High pressure water-cooled three blade Roots blower。

High pressure water-cooled three blade Roots blower

High pressure water-cooled three blade Roots blowerin the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，It has a wide range of uses, including dry, exhaust emission, mix, Desulfurization oxidation and supply air，it has been widely used in mine, aquaculture, aquaculture, petrify, coal chemical industry and other industries。