Introduction to Blowing feeder, Feeder specifications, model parameters

Blowing feederis a common material conveying equipment.，is a kind of high quality and low price Blowing feeder，high wear resistance,low noise,run smoothly,compact structure,strong overload capacity。The following is to introduce the Blowing feeder:

1、Brief introduction of Blowing feeder

Blowing feederas an important bulk material conveying equipment，the advantage is The design of special sealing structure enables the Blowing feeder to maintain high sealing performance during transportation and reduce material leakage and gas reflux.、Impeller, bushing and other key components are made of high-quality wear-resistant materials, which can withstand the friction and wear during material transportation and prolong the service life of the equipment.、Low impact inertia force, suitable for frequent starting and reverse rotation.、It is suitable for conveying powdery and granular materials and can meet the processing requirements of different materials.、It is suitable for hard and abrasive powder, and the replaceable bushing is arranged in the casing to improve the service life and facilitate maintenance and replacement.，it is widely used in mine, plastic metallurgy, grain processing, chemical raw material, building materials and other industries，it has the functions of dust removal equipment discharges dust., equipment feeding, ensure air tightness of the system, blowing-in and continuously and uniformly feed or discharge.，the product looks atmospheric.。

Blowing feeder

2、Blowing feeder function

Blowing feederit has the functions of prevent gas or dust leakage, ensure air tightness of the system, blowing-in, continuously and uniformly feed or discharge. and equipment feeding，the main features are compact structure, strong reliability, good sealing performance, flexible configuration and high wear resistance，be loved by our customers.。

Blowing feeder

3、Blowing feeder structure composition

The Blowing feeder structure is introduced as follows:

1. Motor and transmission device

The motor provides power for the Blowing feeder, and the power is transmitted to the impeller through transmission devices (such as gears and sprockets) to make it rotate. The transmission device shall be designed to ensure smooth and reliable power transmission.

2. sealing element

Seals are used to ensure the sealing performance of the Blowing feeder in the working process and prevent material leakage and gas backflow. High-quality seals can improve the working efficiency and service life of equipment.

3. Rotor and shell

The rotor is the core component of the Blowing feeder, and usually consists of several blades, which rotate in the cylindrical casing. Materials fall from the upper hopper and are filled in the spaces between the blades. With the rotation of the impeller, they are transported to the lower part and discharged from the shell to protect the internal mechanism and seal, and prevent the leakage of materials and the entry of external impurities.

4. impeller

Impeller is the key part of the Blowing feeder to realize material transportation. Its structural design is reasonable, which can ensure the uniform distribution of materials in the spaces between the impellers and be transported smoothly with the rotation of the impellers.

5. Equalizing exhaust port

The side of the Blowing feeder body is provided with a pressure equalizing exhaust port, which can exhaust the high-pressure gas brought by the rotation of the impeller, reduce the phenomenon of gas ejection, and facilitate the smooth falling of materials.

Blowing feeder

4、Blowing feeder field real shot

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Blowing feedert operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Blowing feeder

As you can see from the live video.，hyde powder is a Blowing feeder。

5、Blowing feeder price advantage

The Blowing feeder price is introduced as follows:

1. market supply and demand

Market change is one of the factors that affect the price range greatly. Market change is unstable, but there are certain rules to follow. Market change is caused by other factors, such as economic instability, competition among manufacturers and too big difference between supply and demand. These factors are the core reasons that cause the market to fluctuate greatly, and then it will have a bad impact on prices.

2. cost of production

When the Blowing feeder is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

3. Manufacturer scale

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Blowing feeder. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Blowing feeder will be different.

4. Self quality

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

5. Sales model

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Blowing feeder is low.

Blowing feeder

6、hyde powder workshop picture real shot

The finished products of the Blowing feeder factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde

The finished products of the Blowing feeder factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Blowing feederit has the characteristics of shockproof, low noise, run smoothly, easy maintenance and strong overload capacity，the main structure includes equalizing exhaust port, protective devices (such as sprockets, sprocket covers, etc.), impeller, vent and rotor and shell，multifunctional, with functions such as prevent gas or dust leakage, material handling, dust removal equipment discharges dust., ensure air tightness of the system and continuously and uniformly feed or discharge.。