What is a Standard rotary feeder? Introduction to the principle of Feeder structure

Standard rotary feederis a device for discharging materials, which discharges materials from containers by specific mechanical or pneumatic means.。

1、Brief introduction of Standard rotary feeder

Standard rotary feederas an important bulk material conveying equipment，is a Standard rotary feeder，it has the functions of material handling, blowing-in, ensure air tightness of the system, dust removal equipment discharges dust. and equipment feeding，the advantage is The structure design is reasonable, which is convenient for daily maintenance and overhaul. At the same time, its good sealing performance also reduces the complexity and frequency of maintenance work.、It is suitable for conveying powdery and granular materials and can meet the processing requirements of different materials.、The design of special sealing structure enables the Standard rotary feeder to maintain high sealing performance during transportation and reduce material leakage and gas reflux.、Uniform and stable feeding process, stable discharging operation, low noise, few faults and long service life.、Equipped with frequency conversion governor, the rotating speed of impeller can be adjusted according to actual demand, so as to flexibly control the conveying quantity of materials.，widely used in energy mining industry, building materials cement, grain processing, plastic metallurgy, plastic metallurgy and other fields。

Standard rotary feeder

2、Structural characteristics of Standard rotary feeder

The Standard rotary feeder has the following structure

1. Equalizing exhaust port

The side of the Standard rotary feeder body is provided with a pressure equalizing exhaust port, which can exhaust the high-pressure gas brought by the rotation of the impeller, reduce the phenomenon of gas ejection, and facilitate the smooth falling of materials.

2. Motor and transmission device

The motor provides power for the Standard rotary feeder, and the power is transmitted to the impeller through transmission devices (such as gears and sprockets) to make it rotate. The transmission device shall be designed to ensure smooth and reliable power transmission.

3. impeller

Impeller is the key part of the Standard rotary feeder to realize material transportation. Its structural design is reasonable, which can ensure the uniform distribution of materials in the spaces between the impellers and be transported smoothly with the rotation of the impellers.

4. sealing element

Seals are used to ensure the sealing performance of the Standard rotary feeder in the working process and prevent material leakage and gas backflow. High-quality seals can improve the working efficiency and service life of equipment.

5. Rotor and shell

The rotor is the core component of the Standard rotary feeder, and usually consists of several blades, which rotate in the cylindrical casing. Materials fall from the upper hopper and are filled in the spaces between the blades. With the rotation of the impeller, they are transported to the lower part and discharged from the shell to protect the internal mechanism and seal, and prevent the leakage of materials and the entry of external impurities.

Standard rotary feeder

3、Standard rotary feeder function

Standard rotary feedermultifunctional, with functions such as prevent gas or dust leakage, ensure air tightness of the system, blowing-in, continuously and uniformly feed or discharge. and equipment feeding，is a common Standard rotary feeder，The key components inside the equipment, such as impeller and bushing, are made of excellent materials and have high wear resistance, which can meet the needs of long-term and high-strength material transportation.、Can evenly and continuously feed materials into the clinker pipe to ensure the stability and continuity of material transportation.、It has strong impact resistance, can bear the impact force generated by materials during transportation, and ensures the stable operation of the equipment.、Using the principle of planetary rotation, the input and output shafts are on the same axis, which has compact structure, small volume and light weight.、The structural design makes its maintenance relatively simple, and it is easy to carry out daily inspection and troubleshooting.，Widely used indust removal equipment discharges dust.,material handling,prevent gas or dust leakage,blowing-in,continuously and uniformly feed or discharge. and so on，has been favored by more and more customers.。

Standard rotary feeder

4、Introduction of advantages of Standard rotary feeder

The advantages of Standard rotary feeder are as follows:

1. Smooth operation and low noise.

Uniform and stable feeding process, stable discharging operation, low noise, few faults and long service life.

2. Easy maintenance

The structural design of the Standard rotary feeder makes its maintenance relatively simple, and it is easy to carry out daily inspection and troubleshooting.

3. Flexible adjustment

Some Standard rotary feeders are equipped with variable frequency governors, which can adjust the rotating speed of the impeller according to the actual demand, thus flexibly controlling the conveying quantity of materials.

4. Multi-material handling

It is suitable for conveying powdery and granular materials and can meet the processing requirements of different materials.

5. Flexible configuration

By adjusting the parameters such as Standard rotary feeder speed or blade angle, the conveying capacity of materials can be flexibly adjusted to meet different technological requirements.

Standard rotary feeder

5、How much is the Standard rotary feeder?

The Standard rotary feeder price is introduced as follows:

1. Quality advantages and disadvantages

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Standard rotary feeder.

2. Configuration level

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Standard rotary feeder, which is beyond doubt. hyde makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde powder Standard rotary feeder is reasonable for products with the same configuration.

3. raw material

The quality of material selection is one of the main factors that directly affect the Standard rotary feeder. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. Brand strength

At present, there are various brands of Standard rotary feeder in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Standard rotary feeder are different.

Standard rotary feeder

6、company strength

The company has many years of Standard rotary feeder manufacturing experience, large scale and strong strength.。

hyde

Standard rotary feederat work,Through the rotation of the rotor with several blades in the cylindrical casing, the materials are uniformly and continuously transported from the upper hopper to the lower part to realize the function of feeding or discharging. In the pneumatic conveying system, the Standard rotary feeder is one of the key components, which can supply materials evenly into the clinker pipe. At the same time, in the separation and dust collection part of the system, it also has the functions of unloader and air lock.，Simple structure and advanced technology.，the main structure includes sealing element, protective devices (such as sprockets, sprocket covers, etc.), vent, main valve (including shell, end cover, impeller, sealing structure, etc.), impeller and so on。