What is a Positive electrode material delivery system? How much is the price of the pneumatic conveying system?

Positive electrode material delivery systemthat is, the technology of conveying granular materials in closed pipes by air flow.，The price is relatively low.。

1、Brief introduction of Positive electrode material delivery system

Positive electrode material delivery systemis a material conveying system that uses the pressure of gas to convey powder materials.，it has the functions of material handling, Physical processing assistance, material handling, Environmental protection and pollution-free and Explosion-proof involves，is a Positive electrode material delivery system，Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Materials are transported in a closed pipeline.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.，it is widely used in environmental protection, metallurgy, power, plastic and chemical plant。

Positive electrode material delivery system

2、Positive electrode material delivery system characteristics

Positive electrode material delivery systembe of simple construction,energy saving and environmental protection,Large conveying capacity,Reduce material loss,High system reliability。

Positive electrode material delivery system

3、Structural characteristics of Positive electrode material delivery system

The Positive electrode material delivery system structure is introduced as follows:

1. control system

The control system is the "brain" of the Positive electrode material delivery system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Positive electrode material delivery system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Positive electrode material delivery system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Positive electrode material delivery system

4、Positive electrode material delivery system explanation video

Speak directly with facts on the spot。

Positive electrode material delivery system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the product looks beautiful.。

5、Positive electrode material delivery system principle

Positive electrode material delivery systemin the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.。

Positive electrode material delivery system

Positive electrode material delivery systemis a kind of high quality and low price Positive electrode material delivery system，features include Long conveying distance, No secondary pollution, Easy maintenance, Various processes and Reliable operation。