What is a Polyvinylidene fluoride conveying equipment? Introduction to the advantages, characteristics, and principles of the pneumatic conveying system

Polyvinylidene fluoride conveying equipmentis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.。

1、Brief introduction of Polyvinylidene fluoride conveying equipment

Polyvinylidene fluoride conveying equipmentis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，the advantage is High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.、The whole conveying process is sealed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.，energy saving and environmental protection,High productivity,be of simple construction,Fast conveying speed,Reliable equipment。

Polyvinylidene fluoride conveying equipment

2、Polyvinylidene fluoride conveying equipment structure

The Polyvinylidene fluoride conveying equipment structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Polyvinylidene fluoride conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Polyvinylidene fluoride conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Polyvinylidene fluoride conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Polyvinylidene fluoride conveying equipment

3、Polyvinylidene fluoride conveying equipment picture

The Polyvinylidene fluoride conveying equipment is designed by hyde with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory pneumatic conveying system more quickly, the following high-definition pictures are provided for reference.。

Polyvinylidene fluoride conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Polyvinylidene fluoride conveying equipment use

The purpose of Polyvinylidene fluoride conveying equipment is introduced as follows:

1. save energy and cut emissions

Although the Polyvinylidene fluoride conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Adapt to complex environment

The Polyvinylidene fluoride conveying equipment system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Polyvinylidene fluoride conveying equipment pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. material handling

Polyvinylidene fluoride conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Reduce pollution

The Polyvinylidene fluoride conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Bulk material transportation

The Polyvinylidene fluoride conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Polyvinylidene fluoride conveying equipment, these materials can be efficiently transferred between different production links or equipment.

Polyvinylidene fluoride conveying equipment

5、Polyvinylidene fluoride conveying equipment application

Polyvinylidene fluoride conveying equipments have the following purposes.

1. Multi-point transportation

The Polyvinylidene fluoride conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Process assistance

In some production processes, Polyvinylidene fluoride conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Polyvinylidene fluoride conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Polyvinylidene fluoride conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Dust removal and purification

The Polyvinylidene fluoride conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

5. cut down on energy consumption

Although the power consumption of the Polyvinylidene fluoride conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Polyvinylidene fluoride conveying equipment

Polyvinylidene fluoride conveying equipmentthe advantage is The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、Can be transported from one point to one place or from one point to many points.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The operation mode is flexible and changeable, and it can run continuously or regularly.，the product looks atmospheric.。