Introduction to Anhydrous sodium sulfate pneumatic conveying equipment, advantages, characteristics and principles of Powder pneumatic conveying

Anhydrous sodium sulfate pneumatic conveying equipmentis a technology to transport solid particulate materials through air flow.。

1、Brief introduction of Anhydrous sodium sulfate pneumatic conveying equipment

Anhydrous sodium sulfate pneumatic conveying equipmentIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，the principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，is a kind of high quality and low price Anhydrous sodium sulfate pneumatic conveying equipment，it has been widely used in metallurgy, medicine, build a ship, environmental protection, power and other industries，be loved by our customers.。

Anhydrous sodium sulfate pneumatic conveying equipment

2、Functional advantages of Anhydrous sodium sulfate pneumatic conveying equipment

Anhydrous sodium sulfate pneumatic conveying equipments have the following advantages.

1. Save space

Anhydrous sodium sulfate pneumatic conveying equipment equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

2. Multi-point to multi-point transportation

The Anhydrous sodium sulfate pneumatic conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. energy saving and environmental protection

Because the Anhydrous sodium sulfate pneumatic conveying equipment is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

4. Strong adaptability

The Anhydrous sodium sulfate pneumatic conveying equipment system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

5. High conveying efficiency

The continuity and high efficiency of the Anhydrous sodium sulfate pneumatic conveying equipment enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

Anhydrous sodium sulfate pneumatic conveying equipment

3、Structural advantages of Anhydrous sodium sulfate pneumatic conveying equipment

The Anhydrous sodium sulfate pneumatic conveying equipment has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Anhydrous sodium sulfate pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Anhydrous sodium sulfate pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Anhydrous sodium sulfate pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Anhydrous sodium sulfate pneumatic conveying equipment

4、Introduction of Anhydrous sodium sulfate pneumatic conveying equipment characteristics

Anhydrous sodium sulfate pneumatic conveying equipmentfeatures include Simple system, Reliable equipment, Save manpower, be of simple construction and System modularization，Closed pipeline transportation，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、It is suitable for centralized transportation to one place, and the feeding point can be one or several.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.、Fully enclosed transportation system, materials are transported in closed pipes.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.，it has the functions of Automatic control, Environmental protection and pollution-free, material handling, Explosion-proof involves and Closed conveying，it is an ideal choice for customers to buy Anhydrous sodium sulfate pneumatic conveying equipment。

Anhydrous sodium sulfate pneumatic conveying equipment

5、On-site real shot of Anhydrous sodium sulfate pneumatic conveying equipment

The Anhydrous sodium sulfate pneumatic conveying equipment looks beautiful and atmospheric, and it is realistic for customers to visit.。

Anhydrous sodium sulfate pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Anhydrous sodium sulfate pneumatic conveying equipment principle

Anhydrous sodium sulfate pneumatic conveying equipmentat work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，support customization。

Anhydrous sodium sulfate pneumatic conveying equipment

Anhydrous sodium sulfate pneumatic conveying equipmentfeatures include Can make full use of space, Convenient maintenance, High productivity, High system reliability and Avoid material pollution，is a popular Anhydrous sodium sulfate pneumatic conveying equipment。