Introduction to Intermittent conveying and Pneumatic conveying equipment working principle

Intermittent conveyingis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，was developed and designed by hyde powder。

1、Brief introduction of Intermittent conveying

Intermittent conveyingis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the advantage is Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Materials are transported by closed pipelines.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point discharging, and realize long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.。

Intermittent conveying

2、Video analysis of Intermittent conveying

Speak directly with facts on the spot。

Intermittent conveying

As you can see from the live video.，hyde the main features are Simple operation, be of simple construction, automation, Centralized transportation and Reduce material loss。

3、Intermittent conveying structure composition

The Intermittent conveying has the following structure

1. control system

The control system is the "brain" of the Intermittent conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Intermittent conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Intermittent conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Intermittent conveying

4、Intermittent conveying advantage

The advantages of Intermittent conveying are as follows:

1. Convenient maintenance and easy automation.

The Intermittent conveying device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

2. Structural construction

Intermittent conveying has simple structure and convenient operation.

3. High degree of automation

Intermittent conveyings can realize the automation of transportation process through program control and automation technology. In the whole transportation process, there is no need for manual intervention, and the degree of automation is very high.

4. Various process operations can be realized.

The Intermittent conveying system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Intermittent conveyings widely used in many industries.

5. Small floor space

Compared with other transportation modes, the Intermittent conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

Intermittent conveying

5、Introduction of Intermittent conveying characteristics

Intermittent conveyingthe main features are Flexible pipeline layout, Quantitative transportation, Reliable operation, High productivity and Low energy consumption，is a common Intermittent conveying，the product looks beautiful.，reliable quality。

Intermittent conveying

Intermittent conveyingMaterials are transported in a closed pipeline.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Can realize the transportation of materials in a closed pipeline.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as smash.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation，It is mostly used in Multi-point transportation, Bulk material transportation, Dust removal and essence, Environmental protection and cleaner production, Long distance transportation, Heating, cooling and drying and so on。