What is a Pipeline transportation? Introduction to the Working Principle of Powder pneumatic conveying

Pipeline transportationis a material conveying device that uses the pressure of gas to convey powder materials.，it is an ideal choice for customers to buy Pipeline transportation。

1、Brief introduction of Pipeline transportation

Pipeline transportationmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，It has a wide range of uses, including Heating, cooling and drying, cut down on energy consumption, Process assistance, Bulk material transportation and Environmental protection and cleaner production，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the product looks atmospheric.，is based on hyde powder is carefully developed by hyde combined with advanced technology。

Pipeline transportation

2、Structural advantages of Pipeline transportation

The Pipeline transportation has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pipeline transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Pipeline transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Pipeline transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Pipeline transportation

3、Pipeline transportation function

Pipeline transportationit has the functions of material handling, Automatic control, Explosion-proof involves, Environmental protection and pollution-free and Automatic control，customizable。

Pipeline transportation

4、Pipeline transportation use

The purpose of Pipeline transportation is introduced as follows:

1. Long distance transportation

The Pipeline transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Mixing and classification

In the process of conveying, the Pipeline transportation system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. material handling

Pipeline transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Long-distance and multipoint transportation

The Pipeline transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pipeline transportations have important application value in large factories and cross-regional material transportation.

5. Reduce pollution

The Pipeline transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Pipeline transportation

5、How much is the Pipeline transportation?

The Pipeline transportation price is introduced as follows:

1. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pipeline transportation price and service can meet the actual needs of customers.

2. quality factor

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

3. Manufacturer's strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

4. deploy

Products of the same style, different configurations, the product price is definitely different, therefore, the Pipeline transportation price is affected by the configuration, and the price varies.

5. market

The degree of market competition is also an important factor affecting the price change of products. In order to improve the purchasing power of customers, manufacturers will take preferential measures and appropriately reduce prices.

Pipeline transportation

6、Why choose hyde powder?

Choosing a suitable Pipeline transportation manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Pipeline transportation products that meet the demand and have good cost performance.。

hyde

Pipeline transportationit has the characteristics of Flexible transmission line, Quantitative transportation, Reliable equipment, Centralized transportation and Convenient maintenance，the product looks beautiful.。