Introduction to Nickel powder conveying equipment and Pneumatic conveying equipment working principle

Nickel powder conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，Can realize the transportation of materials in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as smash.、It can be discharged at a single point or at multiple points.、The whole conveying process is sealed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.，it has been widely used in building material, grain processing, transportation, metallurgy, pharmaceutical factory and other industries，Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，structure mainly includes: Bunker system, Air source system, Conveying pipeline system, delivery system, control system and so on，This Nickel powder conveying equipmentThe overall structural design is relatively simple and compact.。

1、Brief introduction of Nickel powder conveying equipment

Nickel powder conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.。

Nickel powder conveying equipment

2、Nickel powder conveying equipment characteristics

Nickel powder conveying equipmentthe main features are Flexible transmission line, Less maintenance., Can carry out long-distance dispersion transportation., Quantitative transportation and Wide range of conveying materials，is a material conveying system that combines jet technology and fluidization technology.，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as cool.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、Remote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.、Can be fed from one place to many places for decentralized transportation.、PLC intelligent control, high degree of automation and simple operation.，has been favored by more and more customers.。

Nickel powder conveying equipment

3、Advantages of Nickel powder conveying equipment principle

Nickel powder conveying equipmentat runtime,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，is a kind of high quality and low price Nickel powder conveying equipment。

Nickel powder conveying equipment

4、Structural advantages of Nickel powder conveying equipment

The Nickel powder conveying equipment has the following structure

1. control system

The control system is the "brain" of the Nickel powder conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Nickel powder conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Nickel powder conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Nickel powder conveying equipment

5、Nickel powder conveying equipment function

Nickel powder conveying equipmentmultifunctional, with functions such as Physical processing assistance, Closed conveying, Explosion-proof involves, material handling and Automatic control，it is an ideal choice for customers to buy Nickel powder conveying equipment。

Nickel powder conveying equipment

6、Nickel powder conveying equipment use

The purpose of Nickel powder conveying equipment is introduced as follows:

1. Mixing and classification

In the process of conveying, the Nickel powder conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Bulk material transportation

The Nickel powder conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Nickel powder conveying equipment, these materials can be efficiently transferred between different production links or equipment.

3. cut down on energy consumption

Although the power consumption of the Nickel powder conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Long-distance and multipoint transportation

The Nickel powder conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Nickel powder conveying equipments have important application value in large factories and cross-regional material transportation.

5. save energy and cut emissions

Although the Nickel powder conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Nickel powder conveying equipment

Nickel powder conveying equipmentCompressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，the product looks beautiful.。