Introduction to Ferrous sulfate powder conveying equipment, pneumatic conveying system specifications, model parameters

Ferrous sulfate powder conveying equipmentis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，is a common Ferrous sulfate powder conveying equipment，is developed and improved by hyde powder。

1、Brief introduction of Ferrous sulfate powder conveying equipment

Ferrous sulfate powder conveying equipmentby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，the advantage is Can be charged at one place, and then discharged at multiple places, and realize remote operation.、The material is completely closed in the whole conveying process.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、Closed pipeline transportation，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

Ferrous sulfate powder conveying equipment

2、Ferrous sulfate powder conveying equipment advantage

The advantages of Ferrous sulfate powder conveying equipment are as follows:

1. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Ferrous sulfate powder conveying equipment occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. Strong adaptability

The Ferrous sulfate powder conveying equipment system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Ferrous sulfate powder conveying equipments widely used in many industries.

3. Flexible layout

The pipeline layout of the Ferrous sulfate powder conveying equipment is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Ferrous sulfate powder conveying equipment system to adapt to various complex production environments and meet different production needs.

4. Low maintenance cost

The Ferrous sulfate powder conveying equipment device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

5. High degree of automation

The Ferrous sulfate powder conveying equipment system is easy to realize automatic control, and can be operated and monitored remotely through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

Ferrous sulfate powder conveying equipment

3、Working principle of Ferrous sulfate powder conveying equipment

Ferrous sulfate powder conveying equipmentat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，It can be used for Bulk material transportation, Long distance transportation, Dust removal and essence, Reduce pollution, cut down on energy consumption, material handling and so on，it is mainly composed of control system, Air source system, delivery system, Air source system and Bunker system，is a kind of high quality and low price Ferrous sulfate powder conveying equipment，super quality and competitive price。

Ferrous sulfate powder conveying equipment

4、Ferrous sulfate powder conveying equipment function

Ferrous sulfate powder conveying equipmentit has the functions of Automatic control, material handling, Physical processing assistance, Environmental protection and pollution-free and material handling，In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、The materials are completely sealed during transportation.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、Can be transported from point to point or from point to point, and realize long-distance operation.，is a Ferrous sulfate powder conveying equipment，Widely used in Mixing and classification, Process assistance, Long-distance and multipoint transportation, Heating, cooling and drying and Environmental protection and cleaner production，is carefully developed by hyde combined with advanced technology。

Ferrous sulfate powder conveying equipment

5、Ferrous sulfate powder conveying equipment use

Ferrous sulfate powder conveying equipments have the following purposes.

1. cut down on energy consumption

Although the power consumption of the Ferrous sulfate powder conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. save energy and cut emissions

Although the Ferrous sulfate powder conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Long-distance and multipoint transportation

The Ferrous sulfate powder conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Ferrous sulfate powder conveying equipments have important application value in large factories and cross-regional material transportation.

4. Adapt to complex environment

The Ferrous sulfate powder conveying equipment system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Ferrous sulfate powder conveying equipment pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Bulk material transportation

The Ferrous sulfate powder conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Ferrous sulfate powder conveying equipment, these materials can be efficiently transferred between different production links or equipment.

Ferrous sulfate powder conveying equipment

6、Ferrous sulfate powder conveying equipment price consultation

The Ferrous sulfate powder conveying equipment price is introduced as follows:

1. product configuration

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Ferrous sulfate powder conveying equipment, which is beyond doubt. hyde makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde powder Ferrous sulfate powder conveying equipment is reasonable for products with the same configuration.

2. Parameter size

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

3. Low cost of raw materials

The cost of manufacturing Ferrous sulfate powder conveying equipment varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. Reasonable cost

Cost is a direct and fundamental factor that affects the price of Ferrous sulfate powder conveying equipment. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Ferrous sulfate powder conveying equipment price, low in cost and low in price.

Ferrous sulfate powder conveying equipment

Ferrous sulfate powder conveying equipmentit has the structure of Bunker system, dust pelletizing system, Bunker system, Conveying pipeline system and delivery system，This productThe structural design is simple, novel and special.，It has a wide range of uses, and is often used inLong-distance and multipoint transportation,Mixing and classification,Bulk material transportation,Multi-point transportation,Multi-point transportation and so on，at work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.。