What is a Sintering lime pneumatic conveying system? Introduction to the advantages, characteristics, and principles of the pneumatic conveying system

Sintering lime pneumatic conveying systemis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，it has the functions of Environmental protection and pollution-free, material handling, Closed conveying, Physical processing assistance and Automatic control，reliable quality。

1、Brief introduction of Sintering lime pneumatic conveying system

Sintering lime pneumatic conveying systemis a kind of material conveying equipment which combines jet technology and fluidization technology.，at work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，it is widely used in machine building, chemical industry, transportation, environmental protection, chemical plant and other industries，is designed by hyde powder with advanced technology。

Sintering lime pneumatic conveying system

2、Sintering lime pneumatic conveying system advantage

The advantages of Sintering lime pneumatic conveying system are as follows:

1. Low maintenance cost

The Sintering lime pneumatic conveying system device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

2. Save space

Sintering lime pneumatic conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

3. High conveying quality

In the process of conveying, the Sintering lime pneumatic conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. versatility

In the process of conveying, the Sintering lime pneumatic conveying system system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

5. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

Sintering lime pneumatic conveying system

3、Sintering lime pneumatic conveying system structure composition

The Sintering lime pneumatic conveying system structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sintering lime pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Sintering lime pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. control system

The control system is the "brain" of the Sintering lime pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Sintering lime pneumatic conveying system

4、Sintering lime pneumatic conveying system characteristics

Sintering lime pneumatic conveying systemit has the characteristics of Easy to use, Economic and environmental protection, automation, be of simple construction and Avoid material pollution，in the course of work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。

Sintering lime pneumatic conveying system

5、Sintering lime pneumatic conveying system HD real shot

The Sintering lime pneumatic conveying system looks beautiful and atmospheric, and it is realistic for customers to visit.。

Sintering lime pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

6、How much is the Sintering lime pneumatic conveying system?

The Sintering lime pneumatic conveying system price is introduced as follows:

1. Configuration level

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Sintering lime pneumatic conveying system, which is beyond doubt. hyde powder makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde Sintering lime pneumatic conveying system is reasonable for products with the same configuration.

2. region

hyde powder has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Sintering lime pneumatic conveying system.

3. product model

Different models will have different specifications, which will lead to greater differences in the comprehensive configuration of products, which will also lead to greater changes in prices.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Sintering lime pneumatic conveying system

Sintering lime pneumatic conveying systemit has the functions of Automatic control, Environmental protection and pollution-free, Explosion-proof involves, material handling and Closed conveying，is an efficient and environment-friendly way to transport materials by using the energy of airflow.。