Introduction to Gypsum powder ash pneumatic conveying system, how much is the price of the pneumatic conveying?

Gypsum powder ash pneumatic conveying systemIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，it has the characteristics of The failure rate is low, High conveying efficiency, Flexible layout, High reliability and automation，the product looks beautiful.。The following is to introduce the Gypsum powder ash pneumatic conveying system:

1、Brief introduction of Gypsum powder ash pneumatic conveying system

Gypsum powder ash pneumatic conveying systemis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，is a Gypsum powder ash pneumatic conveying system，customizable。

Gypsum powder ash pneumatic conveying system

2、Gypsum powder ash pneumatic conveying system application

Gypsum powder ash pneumatic conveying systems have the following purposes.

1. material handling

Gypsum powder ash pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Long-distance and multipoint transportation

The Gypsum powder ash pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Gypsum powder ash pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

3. save energy and cut emissions

Although the Gypsum powder ash pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Environmental protection and cleaner production

The Gypsum powder ash pneumatic conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. cut down on energy consumption

Although the power consumption of the Gypsum powder ash pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Gypsum powder ash pneumatic conveying system

3、Gypsum powder ash pneumatic conveying system structure

The Gypsum powder ash pneumatic conveying system structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Gypsum powder ash pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Air source device

The air source device is the power core of the Gypsum powder ash pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Gypsum powder ash pneumatic conveying system

4、Working principle of Gypsum powder ash pneumatic conveying system

Gypsum powder ash pneumatic conveying systemin the course of work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，usually used in build a ship, chemical plant, heat-engine plant, medicine, transportation and other fields，customizable。

Gypsum powder ash pneumatic conveying system

5、Introduction of Gypsum powder ash pneumatic conveying system characteristics

Gypsum powder ash pneumatic conveying systemReliable operation,Large conveying capacity,Wide range of conveying materials,Simple system,Can make full use of space，it has the structure of Air source system, Conveying pipeline system, dust pelletizing system, Air source system and control system，be loved by our customers.。

Gypsum powder ash pneumatic conveying system

6、Gypsum powder ash pneumatic conveying system principle

Gypsum powder ash pneumatic conveying systemat runtime,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，is a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.。

Gypsum powder ash pneumatic conveying system

Gypsum powder ash pneumatic conveying systemfeatures include Good dustproof effect, Stable operation, Easy maintenance, versatility and Operation safety，the product looks atmospheric.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。