Introduction to Calcination ash conveying equipment and Pneumatic conveying equipment working principle

Calcination ash conveying equipmentit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.。The following is to introduce the Calcination ash conveying equipment:

1、Brief introduction of Calcination ash conveying equipment

Calcination ash conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，multifunctional, with functions such as Explosion-proof involves, Physical processing assistance, Explosion-proof involves, Automatic control and Physical processing assistance，customizable。

Calcination ash conveying equipment

2、Calcination ash conveying equipment application

Calcination ash conveying equipments have the following purposes.

1. material handling

Calcination ash conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Reduce pollution

The Calcination ash conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Mixing and classification

In the process of conveying, the Calcination ash conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. Multi-point transportation

The Calcination ash conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. save energy and cut emissions

Although the Calcination ash conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Calcination ash conveying equipment

3、Calcination ash conveying equipment HD picture

hyde Calcination ash conveying equipment came in many pictures, which made everyone feast their eyes.。

Calcination ash conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Calcination ash conveying equipment characteristics

Calcination ash conveying equipmentit has the characteristics of Reduce material loss, No secondary pollution, Fast conveying speed, Reliable operation and Flexible layout，reliable quality。

Calcination ash conveying equipment

5、Structural characteristics of Calcination ash conveying equipment

The Calcination ash conveying equipment structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Calcination ash conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Calcination ash conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Calcination ash conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Calcination ash conveying equipment

6、Working principle of Calcination ash conveying equipment

Calcination ash conveying equipmentat the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the main features are easy installation, Low energy consumption, Convenient for material transportation and recovery., be of simple construction and Avoid material pollution，the product looks beautiful.。

Calcination ash conveying equipment

Calcination ash conveying equipmentit has the functions of material handling, Environmental protection and pollution-free, Closed conveying, Explosion-proof involves and Environmental protection and pollution-free，It is suitable for centralized transportation to one place, and the feeding point can be one or several.、In the conveying process, various technological operations can be carried out at the same time.、PLC intelligent control, high degree of automation and simple operation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.。