Introduction to Polyethylene particle conveying system, pneumatic conveying specifications, model parameters

Polyethylene particle conveying systemis a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，the advantage is The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、The material is completely closed in the whole conveying process.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、Remote operation can be carried out from several points to one place or from one place to several points.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.。The following is to introduce the Polyethylene particle conveying system:

1、Brief introduction of Polyethylene particle conveying system

Polyethylene particle conveying systemit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，is a Polyethylene particle conveying system，it has the characteristics of Easy maintenance, easy installation, Convenient maintenance, High production efficiency and Flexible transmission line，Simple structure and advanced technology.，structure mainly includes: Conveying pipeline system, control system, dust pelletizing system, delivery system, Air source system and so on，be loved by our customers.。

Polyethylene particle conveying system

2、Polyethylene particle conveying system advantage

The advantages of Polyethylene particle conveying system are as follows:

1. High conveying efficiency

Can transport materials quickly and in large quantities.

2. Strong sealing

The Polyethylene particle conveying system is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

3. Convenient maintenance and easy automation.

The Polyethylene particle conveying system system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

4. energy saving and environmental protection

The whole process of the Polyethylene particle conveying system system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

5. Various process operations can be realized.

While conveying materials, the Polyethylene particle conveying system system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Polyethylene particle conveying system more flexible and adaptable in the production process.

Polyethylene particle conveying system

3、Working principle of Polyethylene particle conveying system

Polyethylene particle conveying systemat runtime,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。

Polyethylene particle conveying system

4、Polyethylene particle conveying system use

The purpose of Polyethylene particle conveying system is introduced as follows:

1. Long distance transportation

The Polyethylene particle conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Bulk material transportation

The Polyethylene particle conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Polyethylene particle conveying system, these materials can be efficiently transferred between different production links or equipment.

3. save energy and cut emissions

Although the Polyethylene particle conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. material handling

Polyethylene particle conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Dust removal and purification

The Polyethylene particle conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Polyethylene particle conveying system

5、Polyethylene particle conveying system characteristics

Polyethylene particle conveying systemthe main features are Flexible pipeline layout, Save manpower, Can reduce the labor intensity, be of simple construction and High degree of automation，is a conveying system that uses airflow to convey powder and granular materials.，the advantage is The operation mode is flexible and changeable, and it can run continuously or regularly.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、The whole conveying process is sealed.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation。

Polyethylene particle conveying system

6、Polyethylene particle conveying system price advantage

The Polyethylene particle conveying system price is introduced as follows:

1. Reasonable cost

The cost of manufacturing Polyethylene particle conveying system varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

2. company strength

The nature of the manufacturer can also greatly affect the price of the Polyethylene particle conveying system. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

3. market competition

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Polyethylene particle conveying system will be very high.

4. Model specification

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

5. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

Polyethylene particle conveying system

Polyethylene particle conveying systemis a material conveying device that uses the pressure of gas to convey powder materials.，is a kind of high quality and low price Polyethylene particle conveying system，It can be used for Heating, cooling and drying, cut down on energy consumption, Bulk material transportation, cut down on energy consumption, Multi-point transportation, Long-distance and multipoint transportation and so on。